NINGBO Electric permanent magnetic chucks ...
NINGBO - Electric permanent magnetic chucks
1. Used for normal and heavy duty drilling, milling, and CNC machining center 2. Best used for the workpieces at least 400*400 mm and 18 mm thick. Ideal for general pieces of various dimensions with normal operating air gaps and medium thicknesses
Electric permanent magnetic chuck (EP50 Series)
1. Comprising 50mm*50mm poles with a force of 15-17kgf/cm2.
2. It is possible to predetermine the force generated by counting the number of poles, work piece gripping at least 4 pole contact faces.
3.Controller do the Magnetizing or demagnetizing in 0.5~ 5 seconds.
4.Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests
Use:
1.Used for normal and heavy duty drilling, milling, and CNC machining center
2.Best used for the workpieces at least 250*250 mm and 10 mm thick. Used for small, medium dimensions with normal operating air gaps and thinner workpieces.
Standard Features and Benefits:
1 Flexibility :
• Allow single set-up machining with 5-sided accessibility
• workpieces larger than the table are machinable
2 Safety
• No electric power supply during clamping.
• Constant and uniform magnetic power over entire area.
• No temperature rise in operation. so no impact on precision and work piece deformation due to temperature rise. Can used for long time.
3 Efficient
• Easy and quick position, reduce set-up time and increase available machine time.
• High accuracies and tolerances
4 Cost-effectiveness
• no maintenance
• no machine modifications
• reduced tool consumption
Electric permanent magnetic chuck (EP75 Series)
DESCRIPTION :
1. Comprising 75mm*75mm poles with a force of 15-17kgf/ cm2.
2. It is possible to predetermine the force generated by counting the number of poles, work piece gripping at least 4 pole contact faces.
3.Controller do the Magnetizing or demagnetizing in 0.5~5 seconds.
4.Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests
USE:
1.Used for normal and heavy duty drilling, milling, and CNC machining center
2.Best used for the workpieces at least 400*400 mm and 18 mm thick. Ideal for general pieces of various dimensions with normal operating air gaps and medium thicknesses
Standard Features and Benefits:
1 Flexibility :
• Allow single set-up machining with 5-sided accessibility
• workpieces larger than the table are machinable
2 Safety
• No electric power supply during clamping
• Constant and uniform magnetic power over entire area.
• No temperature rise in operation. so no impact on precision and work piece deformation due to temperature rise. Can used for long time.
3 Efficient
• Easy and quick position, reduce set-up time and increase available machine time.
• High accuracies and tolerances
4 Cost-effectiveness
• no maintenance
• no machine modifications
• reduced tool consumption
Range of products include:
- electro-permanent magnetic chuck
- permanent magnetic chuck
- permanent magnetic lifter
- NbFeB magnets and other related products
Those products are widely used for CNC machine, milling, grinding turning, molding applications and other industry field etc.
To contact Delahenty Machinery about NINGBO Electric permanent magnetic chucks use Get a quote.
Electric permanent magnetic chuck (EP50 Series)
1. Comprising 50mm*50mm poles with a force of 15-17kgf/cm2.
2. It is possible to predetermine the force generated by counting the number of poles, work piece gripping at least 4 pole contact faces.
3.Controller do the Magnetizing or demagnetizing in 0.5~ 5 seconds.
4.Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests
Use:
1.Used for normal and heavy duty drilling, milling, and CNC machining center
2.Best used for the workpieces at least 250*250 mm and 10 mm thick. Used for small, medium dimensions with normal operating air gaps and thinner workpieces.
Standard Features and Benefits:
1 Flexibility :
• Allow single set-up machining with 5-sided accessibility
• workpieces larger than the table are machinable
2 Safety
• No electric power supply during clamping.
• Constant and uniform magnetic power over entire area.
• No temperature rise in operation. so no impact on precision and work piece deformation due to temperature rise. Can used for long time.
3 Efficient
• Easy and quick position, reduce set-up time and increase available machine time.
• High accuracies and tolerances
4 Cost-effectiveness
• no maintenance
• no machine modifications
• reduced tool consumption
Electric permanent magnetic chuck (EP75 Series)
DESCRIPTION :
1. Comprising 75mm*75mm poles with a force of 15-17kgf/ cm2.
2. It is possible to predetermine the force generated by counting the number of poles, work piece gripping at least 4 pole contact faces.
3.Controller do the Magnetizing or demagnetizing in 0.5~5 seconds.
4.Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests
USE:
1.Used for normal and heavy duty drilling, milling, and CNC machining center
2.Best used for the workpieces at least 400*400 mm and 18 mm thick. Ideal for general pieces of various dimensions with normal operating air gaps and medium thicknesses
Standard Features and Benefits:
1 Flexibility :
• Allow single set-up machining with 5-sided accessibility
• workpieces larger than the table are machinable
2 Safety
• No electric power supply during clamping
• Constant and uniform magnetic power over entire area.
• No temperature rise in operation. so no impact on precision and work piece deformation due to temperature rise. Can used for long time.
3 Efficient
• Easy and quick position, reduce set-up time and increase available machine time.
• High accuracies and tolerances
4 Cost-effectiveness
• no maintenance
• no machine modifications
• reduced tool consumption
Range of products include:
- electro-permanent magnetic chuck
- permanent magnetic chuck
- permanent magnetic lifter
- NbFeB magnets and other related products
Those products are widely used for CNC machine, milling, grinding turning, molding applications and other industry field etc.
To contact Delahenty Machinery about NINGBO Electric permanent magnetic chucks use Get a quote.
NINGBO electric permanent magnetic chucks are EP50 and EP75 series workholding units that magnetically hold workpieces during machining operations. A controller magnetises or demagnetises the chuck in 0.5–5 seconds, changing it between its two magnetic states. For normal and heavy-duty drilling, milling and CNC machining, five-sided access lets operators machine multiple faces in one setup.
- EP50 uses 50 mm x 50 mm poles, with 15–17 kgf/cm² force
- EP75 uses 75 mm x 75 mm poles, with 15–17 kgf/cm² force
- Workpieces must contact at least four pole faces for gripping
- Testing covers slipping force, waterproofing, temperature rise, electrical function and demagnetising
- The chuck clamps without electrical power
Source: listing by Delahenty Machinery on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Delahenty Machinery on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
- Your delivery location?
- NSW
- VIC
- QLD
- SA
- WA
- NT
- ACT
- TAS
- New Zealand
- Papua New Guinea
- Afghanistan
- Albania
- Algeria
- Andorra
- Angola
- Antigua and Barbuda
- Argentina
- Armenia
- Austria
- Azerbaijan
- Bahamas
- Bahrain
- Bangladesh
- Barbados
- Belarus
- Belgium
- Belize
- Benin
- Bhutan
- Bolivia
- Bosnia and Herzegovina
- Botswana
- Brazil
- Brunei
- Bulgaria
- Burkina Faso
- Burma
- Burundi
- Cabo Verde
- Cambodia
- Cameroon
- Canada
- Central African Republic
- Chad
- Chile
- China
- Colombia
- Comoros
- Congo (Brazzaville)
- Congo (Kinshasa)
- Costa Rica
- Côte d'Ivoire
- Croatia
- Cuba
- Cyprus
- Czechia
- Denmark
- Djibouti
- Dominica
- Dominican Republic
- Ecuador
- Egypt
- El Salvador
- Equatorial Guinea
- Eritrea
- Estonia
- Ethiopia
- Fiji
- Finland
- France
- Gabon
- Gambia
- Georgia
- Germany
- Ghana
- Greece
- Grenada
- Guatemala
- Guinea
- Guinea-Bissau
- Guyana
- Haiti
- Holy See
- Honduras
- Hungary
- Iceland
- India
- Indonesia
- Iran
- Iraq
- Ireland
- Israel
- Italy
- Jamaica
- Japan
- Jordan
- Kazakhstan
- Kenya
- Kiribati
- Korea, North
- Korea, South
- Kosovo
- Kuwait
- Kyrgyzstan
- Laos
- Latvia
- Lebanon
- Lesotho
- Liberia
- Libya
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Madagascar
- Malawi
- Malaysia
- Maldives
- Mali
- Malta
- Marshall Islands
- Mauritania
- Mauritius
- Mexico
- Federated States of Micronesia
- Moldova
- Monaco
- Mongolia
- Montenegro
- Morocco
- Mozambique
- Namibia
- Nauru
- Nepal
- Netherlands
- New Zealand
- Nicaragua
- Niger
- Nigeria
- Norway
- Oman
- Pakistan
- Palau
- Panama
- Papua New Guinea
- Paraguay
- Peru
- Philippines
- Poland
- Portugal
- Qatar
- Romania
- Russia
- Rwanda
- Saint Kitts and Nevis
- Saint Lucia
- Saint Vincent and the Grenadines
- Samoa
- San Marino
- Sao Tome and Principe
- Saudi Arabia
- Senegal
- Serbia
- Seychelles
- Sierra Leone
- Singapore
- Slovakia
- Slovenia
- Solomon Islands
- Somalia
- South Africa
- South Sudan
- Spain
- Sri Lanka
- Sudan
- Suriname
- Swaziland
- Sweden
- Switzerland
- Syria
- Taiwan
- Tajikistan
- Tanzania
- Thailand
- Timor-Leste
- Togo
- Tonga
- Trinidad and Tobago
- Tunisia
- Turkey
- Turkmenistan
- Tuvalu
- Uganda
- Ukraine
- United Arab Emirates
- United Kingdom
- United States
- Uruguay
- Uzbekistan
- Vanuatu
- Venezuela
- Vietnam
- Yemen
- Zambia
- Zimbabwe
- NSW
- VIC
- QLD
- SA
- WA
- NT
- ACT
- TAS
- New Zealand
- Papua New Guinea
- Afghanistan
- Albania
- Algeria
- Andorra
- Angola
- Antigua and Barbuda
- Argentina
- Armenia
- Austria
- Azerbaijan
- Bahamas
- Bahrain
- Bangladesh
- Barbados
- Belarus
- Belgium
- Belize
- Benin
- Bhutan
- Bolivia
- Bosnia and Herzegovina
- Botswana
- Brazil
- Brunei
- Bulgaria
- Burkina Faso
- Burma
- Burundi
- Cabo Verde
- Cambodia
- Cameroon
- Canada
- Central African Republic
- Chad
- Chile
- China
- Colombia
- Comoros
- Congo (Brazzaville)
- Congo (Kinshasa)
- Costa Rica
- Côte d'Ivoire
- Croatia
- Cuba
- Cyprus
- Czechia
- Denmark
- Djibouti
- Dominica
- Dominican Republic
- Ecuador
- Egypt
- El Salvador
- Equatorial Guinea
- Eritrea
- Estonia
- Ethiopia
- Fiji
- Finland
- France
- Gabon
- Gambia
- Georgia
- Germany
- Ghana
- Greece
- Grenada
- Guatemala
- Guinea
- Guinea-Bissau
- Guyana
- Haiti
- Holy See
- Honduras
- Hungary
- Iceland
- India
- Indonesia
- Iran
- Iraq
- Ireland
- Israel
- Italy
- Jamaica
- Japan
- Jordan
- Kazakhstan
- Kenya
- Kiribati
- Korea, North
- Korea, South
- Kosovo
- Kuwait
- Kyrgyzstan
- Laos
- Latvia
- Lebanon
- Lesotho
- Liberia
- Libya
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Madagascar
- Malawi
- Malaysia
- Maldives
- Mali
- Malta
- Marshall Islands
- Mauritania
- Mauritius
- Mexico
- Federated States of Micronesia
- Moldova
- Monaco
- Mongolia
- Montenegro
- Morocco
- Mozambique
- Namibia
- Nauru
- Nepal
- Netherlands
- New Zealand
- Nicaragua
- Niger
- Nigeria
- Norway
- Oman
- Pakistan
- Palau
- Panama
- Papua New Guinea
- Paraguay
- Peru
- Philippines
- Poland
- Portugal
- Qatar
- Romania
- Russia
- Rwanda
- Saint Kitts and Nevis
- Saint Lucia
- Saint Vincent and the Grenadines
- Samoa
- San Marino
- Sao Tome and Principe
- Saudi Arabia
- Senegal
- Serbia
- Seychelles
- Sierra Leone
- Singapore
- Slovakia
- Slovenia
- Solomon Islands
- Somalia
- South Africa
- South Sudan
- Spain
- Sri Lanka
- Sudan
- Suriname
- Swaziland
- Sweden
- Switzerland
- Syria
- Taiwan
- Tajikistan
- Tanzania
- Thailand
- Timor-Leste
- Togo
- Tonga
- Trinidad and Tobago
- Tunisia
- Turkey
- Turkmenistan
- Tuvalu
- Uganda
- Ukraine
- United Arab Emirates
- United Kingdom
- United States
- Uruguay
- Uzbekistan
- Vanuatu
- Venezuela
- Vietnam
- Yemen
- Zambia
- Zimbabwe
Automatic Band Saw - GZ-4250H
Vertical H Frame Workshop Press
Cylinder Barrel Washer CBW-300
Pin Pusher for Small Tracks: HEPP 30T & 50T
HEMS – Pin Pusher for Medium Tracks: HEPP 100T/E
KS 502 – Semi Automatic Double Column Bandsaw
Tube and Pipe Bending - BM60 [In stock - ready to deliver]
Section and Profile Rolling Machine - MODEL 303HV
SERIES 1 - Section Roller
Section and Profile Rolling Machines - Series 3000
Tube and Pipe Bending Machine - BM48 [In stock - ready to deliver]
Tube and Pipe Bending Machine - BM76 [In stock - ready to deliver]
CNC Electric Tube Bender – CNC-50MS-AE
CNC Electric Tube Bender - CNC38MS-AE
CNC Hybrid Tube Bender - CNC-101MS-8A
CNC Hybrid Tube Bending Machine - CNC-80MS-5A
CNC Hybrid Tube Bending Machine - CNC-38MS-5A
Mesh Bending Machines Range
Radius Gauge Sets [In stock - ready to deliver]
3-in-1 Busbar Machine: HBC-PC120
RED-I-GRIP Permanent Magnetic Chuck 9732 Series
RED-I-GRIP Radial Pole Magnetic Chucks
Magnetic Chuck Blocks - RIMET
RED-I-GRIP | Magnetic Chuck Standard Pole 9733 series
EEPM Electro-Permanent Magnetic Chucks
Electro-Permanent Magnetic Chucks for Horizontal Machining
Electro-Permanent Magnetic Chucks for 4 and 5 Axis Machining
Electro-Permanant Magnet Chucks for Vertical Machining
Magnetic Chucks 200 X 500MM
Magnetic Chucks 200 X 600MM
Magnetic Chucks 250 X 600MM
Magnetic Chucks 125 X 250MM A
Magnetic Chucks 125 X 300MM CA
Magnetic Chucks 150 X 300MM CA
Magnetic Chucks 250mm Round
Magnetic Chucks 350mm Round
Magnetic Chucks 400mm Round
Magnetic Chucks 500mm Round
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product
