Polygonal Dust Collectors for sale from Inquip

Polygonal Dust Collectors

Supplier: Inquip

Polygonal Dust Collectors

WAMAIR Dust Collectors are widely recognised as the most versatile and compact dust collector range available on the world market for industrial applications.

19 Recent Views In Stock

WAMAIR Dust Collectors consist of a polygonally shaped 304 stainless steel casing, horizontally or vertically inserted filter elements, and a reverse air jet cleaning system integrated in the hinged front easy access door. WAMAIR Dust Collectors are either built in for venting applications or come as a stand-alone unit with dust collecting hopper. Versions with an integrated fan are available for suction applications.

Function

WAMAIR Dust Collectors separate dust from the air flow by means of pocket-type or special POLYPLEAT filter elements. Dust drops down after a programmable, automatic reverse air jet cleaning device integrated in the access door has removed it from the filtering elements.

By opening the access door the operator can easily and safely remove the filtering elements from the clean air side. The dirty air flow may enter the filter casing from the top inlet flange where heavier particles are subsequently pre-separated while the flow is on its descent. Alternatively, dirty air may enter from the bottom flange which can be either connected to a PT-type WAM hopper or to the device to be de-dusted (silo, belt conveyor, bucket elevator, chain conveyor, etc.).

ATEX-versions for Zone 22 (Category 3D) and Zone 21 (Category 2D) are available.
All ATEX versions are suitable for application in internal Zone 20.

Features

Robust, compact 304 stainless steel design
Filtering surface: 3 ~ 70m2 (32 ~ 755 sq ft)
Air volume: 250 ~ 6,500 m3/h (147 ~ 3,830 cfm)
High filtration efficiency thanks to wide range of B.I.A.-certified filter media
Standard version with programmable electronic control panel installed including end-of-cycle cleaning system
Reverse air jet cleaning system integrated inside access door for easy maintenance
High cleaning efficiency due to "Full Immersion" solenoid valves incorporated in aluminium air tank
Quick and safe filtering element replacement from clean air side
Quick installation
Food-grade version manufactured from FDA and EU 1935/2004-approved materials
Standard equipment developed for temperature range from -20°C to 80°C (-4F to 176°F)
ATEX-version for Zone 22 (Category 3D) and Zone 21 (category 2D) available
All ATEX versions suitable for application in internal Zone 20
ATEX reduced pressure (PRED = 0.25 barg)
Explosion relief panel (option)
Silenced fan integrated in access door reducing operating noise level

Benefits

Industrial design
Wide range of high quality filtering elements
Advanced dust filtration technology
Low dust emission

Options

Fan available in different voltages, frequencies and power rating
Spigot for centralised dust suction
Dust collecting hopper prearranged for butterfly valve, rotary valve, as well as various types of flow aids
Hopper bucket (option)
Electronic differential pressure meter (MDPE) – (option)
Winter protection for solenoid valves (option)
Pneumatic valve controller for cleaning system (standard ATEX Zone 21)

To contact Inquip about Polygonal Dust Collectors use Get a quote.

Function

ATEX-versions for Zone 22 (Category 3D) and Zone 21 (Category 2D) are available.
All ATEX versions are suitable for application in internal Zone 20.

Features

Robust, compact 304 stainless steel design
Filtering surface: 3 ~ 70m2 (32 ~ 755 sq ft)
Air volume: 250 ~ 6,500 m3/h (147 ~ 3,830 cfm)
High filtration efficiency thanks to wide range of B.I.A.-certified filter media
Standard version with programmable electronic control panel installed including end-of-cycle cleaning system
Reverse air jet cleaning system integrated inside access door for easy maintenance
High cleaning efficiency due to "Full Immersion" solenoid valves incorporated in aluminium air tank
Quick and safe filtering element replacement from clean air side
Quick installation
Food-grade version manufactured from FDA and EU 1935/2004-approved materials
Standard equipment developed for temperature range from -20°C to 80°C (-4F to 176°F)
ATEX-version for Zone 22 (Category 3D) and Zone 21 (category 2D) available
All ATEX versions suitable for application in internal Zone 20
ATEX reduced pressure (PRED = 0.25 barg)
Explosion relief panel (option)
Silenced fan integrated in access door reducing operating noise level

Benefits

Industrial design
Wide range of high quality filtering elements
Advanced dust filtration technology
Low dust emission

Options

Fan available in different voltages, frequencies and power rating
Spigot for centralised dust suction
Dust collecting hopper prearranged for butterfly valve, rotary valve, as well as various types of flow aids
Hopper bucket (option)
Electronic differential pressure meter (MDPE) – (option)
Winter protection for solenoid valves (option)
Pneumatic valve controller for cleaning system (standard ATEX Zone 21)

Read less...

To contact Inquip about Polygonal Dust Collectors use Get a quote.

AI Overview BETA

Inquip supplies WAMAir polygonal dust collectors that separate dust from airflow using pocket-type or special POLYPLEAT filter elements. A programmable reverse-air-jet cycle automatically cleans the filters, allowing dislodged dust to drop down. For industrial venting or suction applications, buyers can choose built-in configurations, stand-alone units with a dust hopper, or models with an integrated fan.