Ramset Ramset Ramplug
Ramset - Ramset Ramplug
The Ramset Ramplug is a light weight screw fixing for use in solid material. Suitable for use with all types of screws. Available in Long and Ultralong.
UltraLong Ramplug
Anti rotation fins are compressed within the hole and prevent the Ramplug from rotating during expansion.
Best used in solid masonry and pressed clay bricks.
The fixing screw can be removed and re-installed into the expanded Ramplug at will.
How to use
Ramplug
- Through fixing using the fixture as a template;
- Drill hole to the correct diameter and required depth. Clean Hole thoroughly of dust and swarf;
- Press in the Ramplug until flush with surface;
- Pass the correct length and gauge screw through the fixture and tighten fully into the Ramplug, using a screwdriver or socket spanner as required.
Long Ramplug
- Drill hole to the correct diameter and required depth. Clean Hole thoroughly;
- Tap in the Ramplug up to anchor collar;
- Drive screw in with pozi number four drive bit until the screw is flush with collar.
To contact ITW Proline about Ramset Ramset Ramplug use Get a quote.
UltraLong Ramplug
Anti rotation fins are compressed within the hole and prevent the Ramplug from rotating during expansion.
Best used in solid masonry and pressed clay bricks.
The fixing screw can be removed and re-installed into the expanded Ramplug at will.
How to use
Ramplug
- Through fixing using the fixture as a template;
- Drill hole to the correct diameter and required depth. Clean Hole thoroughly of dust and swarf;
- Press in the Ramplug until flush with surface;
- Pass the correct length and gauge screw through the fixture and tighten fully into the Ramplug, using a screwdriver or socket spanner as required.
Long Ramplug
- Drill hole to the correct diameter and required depth. Clean Hole thoroughly;
- Tap in the Ramplug up to anchor collar;
- Drive screw in with pozi number four drive bit until the screw is flush with collar.
To contact ITW Proline about Ramset Ramset Ramplug use Get a quote.
Ramset Ramplug is a lightweight screw fixing for solid materials, available in Long and UltraLong versions. On the UltraLong Ramplug, anti-rotation fins compress inside the hole to prevent the plug turning during expansion. For solid masonry and pressed clay brick work, the screw can be removed and reinstalled in the expanded Ramplug at will, using a screwdriver or socket spanner.
- Through fixing: use the fixture as a drilling template
- Drill to the correct diameter and depth, then clean the hole thoroughly
- Ramplug: press into the hole until flush with the surface
- Long Ramplug: tap into the hole up to the anchor collar
- Long Ramplug: Pozi No. 4 bit drives screw flush with collar
Source: listing by ITW Proline on IndustrySearch · Updated 3 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by ITW Proline on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales