Zenith Treated Timber Screws

Zenith - Treated Timber Screws

Supplier: ITW Proline

Treated Timber Screws

Zenith self-drilling Treated Pine screws are specially designed for quick and easy installation with maximum holding power.

75 Recent Views Call for more details

Available in Tufcote coating to resist the corrosive effects of treated timbers.

Countersunk Rib Head

For general fixing to Treated Timber, e.g., trellis, outdoor furniture, fencing, lattic, etc.

How to use Zenith Treated Timber Screws:

Measure the total thickness of the materials to be fixed.
Choose a screw long enough to provide approximately 20mm of thread embedment into the timber.
Fit a #2 Phillips drive bit to a power screwdriver set to a low speed, approximately 1000rpm.
Put screw onto a screw drive bit and place at fastening position.
Push sharply on screwdriver to create a starting point.
Drive screw home until head is flush with the surface.

To contact ITW Proline about Zenith Treated Timber Screws use Get a quote.

Available in Tufcote coating to resist the corrosive effects of treated timbers.

Countersunk Rib Head

For general fixing to Treated Timber, e.g., trellis, outdoor furniture, fencing, lattic, etc.

How to use Zenith Treated Timber Screws:

Measure the total thickness of the materials to be fixed.
Choose a screw long enough to provide approximately 20mm of thread embedment into the timber.
Fit a #2 Phillips drive bit to a power screwdriver set to a low speed, approximately 1000rpm.
Put screw onto a screw drive bit and place at fastening position.
Push sharply on screwdriver to create a starting point.
Drive screw home until head is flush with the surface.

To contact ITW Proline about Zenith Treated Timber Screws use Get a quote.