The Hybrid range offers great cost saving potentials for both stock & domestic and irrigation use, including 24 hour pumping applications.
Amongst other new features, the motors on hybrid range of pumps can be connected to either solar panels or mains power. When using the system monitor – the pump can run from solar power during the day & automatically switch to mains power in the evening or poor weather (system monitor sold separately). Also the low water sensor is built into the motor, eliminating the need to run an extra sensor & cable.
Motor & Controller Features
Connect either mains/generator AC power OR Solar DC power to the same motor wires (not at the same time – this can be done using the system monitor)
Ultra-wide Solar input voltage range – from 90Vmp-360Vmp
Connect up to ~ 3kW of solar panels
Solar array Open Circuit Voltage – 440 VOC
Up to 2.2kW (2200w) output power
Internal low water protection – no need to run an extra sensor & cable down to the pump
Operating range of 500-3400 RPM – variable frequency control for improved low light performance
Soft Start – increases pump and motor life & reduces start-up current draw
Full Protection features: Over-voltage, Over-current, Reverse polarity, Over-head, Lost phase and Under-voltage
Double shielded motors with ceramic bearings – no mechanical seals, reduced internal friction, better rotor cooling & temperature stability
Strong stainless steel 304 construction
Easy set-up with basic installations requiring only the included switch between the solar panels & the pump and a float switch in the tank if required.
Optional System Monitor Features
Dual Power Input – connect both solar panels and mains or generator power in the monitor
Automatic Solar priority, switching to AC power in low light – widens the potential for cost saving hybrid solar pumping applications
Float sensor or Pressure switch input – for automated pumping systems
Maximum Flow Rate – 40.6m3 or 678L/min with no head resistance (see curve graph above for head & flow performance range)
Maximum Head Pressure – 38m or 50PSI (where flow drops to 0)
Motor Power – 2.8HP or 2800w
Motor & Pump Outer Diameter – 4″
Pump Outlet Size – 2″ BSP
Maximum Solar Array Voc – 440v
Recommended Solar Vmp range – 90v – 360v
2.8HP / 2800w Motor / Controller & SS Multi-stage Pump head
Solar panels (if ordered – see selections at top of page)
10m Solar panel extension lead with MC4 connectors one end
Weatherproof solar isolator switch
Wiring connection guide
Commodore Australia | Alternative Energy- Solar Pumps, Off-grid Solar
Commodore Australia is a company dedicated to alternative energy; from solar pumps to solar electric fences to generators, batteries and everything in between.
We’re 100% Australian-owned and committed ...