Swage Ferrules
Swage Ferrules
TALURIT™ – here with a small swager with high capacity.
The 18-ton Swager has a single pillar open throat design and can be used either vertically or
horizontally, bench mounted or free standing. An adjustable stand can be offered as an option.
In a single stage swage T-ferrules up to No. 6 can be swaged. Multi stage swaging makes it possible to swage
T-ferrules up to No. 8. Note! All our dies are manufactured from hardened and tempered die steel for long life
and durability.
Operating the pump: Close the valve on the pump and start pumping the handle to close the dies.
Open the relief valve to open the dies.
- Economically priced
- Robust design
- Total reliability
- User friendly
- Two models
- Automatic shut down
30 TON 1-PILLAR SWAGER
TALURIT™
TALURIT™ – here with a small Swager with high capacity
The 30-ton Swager has a single pillar open throat design and can be used either vertically or
horizontally, bench mounted or free standing. An adjustable stand can be offered as an option.
It offers total flexibility.
Due to lightweight and easy operation it is suitable to use in the field.
In a single stage swage T-ferrules up to No. 8 can be swaged. Multi stage swaging makes it possible to swage
T-ferrules up to No. 10. Note! All our dies are manufactured from hardened and tempered die steel for long life
and durability.
Operating the pump: Close the valve on the pump and start pumping the handle to close the dies.
- Economically priced
- Robust design
- Total reliability
- User friendly
- Two models
With option
- Automatic return
- Pressure pre-setting
75 TON 1-PILLAR SWAGER
TALURIT™
TALURIT™ – here with a powerful and compact Swager
The 75-ton Swager has a single pillar open throat design and can be used either vertically or horizontally, bench mounted or free standing. It offers total flexibility. The Swager can be fitted with alternative hydraulic units as shown below. It is easy to use in the field due to lightweight and easy operation.
The machine can swage T-ferrules up to No.11 and UM-ferrules up to No.12 in a single stage.
Multi stage swaging makes it possible to swage T-ferrules up to No.16 and UM-ferrules up to No.18.
Note! All our dies are manufactured from hardened and tempered die steel for long life and durability.
The swaging operation is controlled by an electric foot pedal that permits the operator to use both hands when swaging.
In addition to the normal up/down function, the foot pedal has a ”hold” position to facilitate rope/eye adjustment and to make tool set-up quicker. The retraction of the piston is limited by a time delay and maximum pressure is set by a pressure valve.
When left unused the automatic shut down turns off the swager. It is easily started again by pressing the foot pedal.
By setting the required pressure on the optional pressure gauge MA 250, the piston returns automatically
once the pressure is reached. This saves time and unnecessary movements for the operator.
- Economically priced
- Robust design
- Total reliability
- User friendly
- Two models
- Automatic shut down
With option
- Automatic return
- Pressure pre-setting
150 TON 1-PILLAR SWAGER
TALURIT™
TALURIT™ – here with the most powerful Swager among the smallest
The 150-ton Swager has a single pillar open throat design and can be used either vertically or horizontally, bench mounted or free standing. it offers total flexibility. This swager is easy to use and the open design allows easy access to the dies.
The Swager can be fitted with 3,0 and 4,0 kW hydraulic units as shown below. A 5,5 kW hydraulic unit is also available and makes this press even more powerful and efficient. We recommend this hydraulic unit when mainly swaging ferrules above size 6 in serial production.
In a single stage swage T-ferrules up to No.16 and UM-ferrules up to No.18 can be swaged.
Multi stage swaging makes it possible to swage T-ferrules up to No. 20 and UM-ferrules up to No. 22.
Note! All our dies are manufactured from hardened and tempered die steel for long life and durability.
The swaging operation is controlled by an electric foot pedal permitting the operator to use both hands when swaging.
In addition to the normal up/down function, the foot pedal has a "hold" position to facilitate rope/eye adjustment and to make tool set-up quicker. The retraction of the piston is limited by a time delay and a pressure valve sets maximum pressure. When left unused the automatic shut down turns off the swager. It is easily started again by pressing the foot pedal.
By setting the required pressure on the optional pressure gauge MA 250, the piston returns automatically
once the pressure is reached. This saves time and unnecessary movements for the operator.
For more information on Swage Ferrules please click here.
To contact Bridco about Swage Ferrules use Get a quote.
The 18-ton Swager has a single pillar open throat design and can be used either vertically or
horizontally, bench mounted or free standing. An adjustable stand can be offered as an option.
In a single stage swage T-ferrules up to No. 6 can be swaged. Multi stage swaging makes it possible to swage
T-ferrules up to No. 8. Note! All our dies are manufactured from hardened and tempered die steel for long life
and durability.
Operating the pump: Close the valve on the pump and start pumping the handle to close the dies.
Open the relief valve to open the dies.
- Economically priced
- Robust design
- Total reliability
- User friendly
- Two models
- Automatic shut down
30 TON 1-PILLAR SWAGER
TALURIT™
TALURIT™ – here with a small Swager with high capacity
The 30-ton Swager has a single pillar open throat design and can be used either vertically or
horizontally, bench mounted or free standing. An adjustable stand can be offered as an option.
It offers total flexibility.
Due to lightweight and easy operation it is suitable to use in the field.
In a single stage swage T-ferrules up to No. 8 can be swaged. Multi stage swaging makes it possible to swage
T-ferrules up to No. 10. Note! All our dies are manufactured from hardened and tempered die steel for long life
and durability.
Operating the pump: Close the valve on the pump and start pumping the handle to close the dies.
- Economically priced
- Robust design
- Total reliability
- User friendly
- Two models
With option
- Automatic return
- Pressure pre-setting
75 TON 1-PILLAR SWAGER
TALURIT™
TALURIT™ – here with a powerful and compact Swager
The 75-ton Swager has a single pillar open throat design and can be used either vertically or horizontally, bench mounted or free standing. It offers total flexibility. The Swager can be fitted with alternative hydraulic units as shown below. It is easy to use in the field due to lightweight and easy operation.
The machine can swage T-ferrules up to No.11 and UM-ferrules up to No.12 in a single stage.
Multi stage swaging makes it possible to swage T-ferrules up to No.16 and UM-ferrules up to No.18.
Note! All our dies are manufactured from hardened and tempered die steel for long life and durability.
The swaging operation is controlled by an electric foot pedal that permits the operator to use both hands when swaging.
In addition to the normal up/down function, the foot pedal has a ”hold” position to facilitate rope/eye adjustment and to make tool set-up quicker. The retraction of the piston is limited by a time delay and maximum pressure is set by a pressure valve.
When left unused the automatic shut down turns off the swager. It is easily started again by pressing the foot pedal.
By setting the required pressure on the optional pressure gauge MA 250, the piston returns automatically
once the pressure is reached. This saves time and unnecessary movements for the operator.
- Economically priced
- Robust design
- Total reliability
- User friendly
- Two models
- Automatic shut down
With option
- Automatic return
- Pressure pre-setting
150 TON 1-PILLAR SWAGER
TALURIT™
TALURIT™ – here with the most powerful Swager among the smallest
The 150-ton Swager has a single pillar open throat design and can be used either vertically or horizontally, bench mounted or free standing. it offers total flexibility. This swager is easy to use and the open design allows easy access to the dies.
The Swager can be fitted with 3,0 and 4,0 kW hydraulic units as shown below. A 5,5 kW hydraulic unit is also available and makes this press even more powerful and efficient. We recommend this hydraulic unit when mainly swaging ferrules above size 6 in serial production.
In a single stage swage T-ferrules up to No.16 and UM-ferrules up to No.18 can be swaged.
Multi stage swaging makes it possible to swage T-ferrules up to No. 20 and UM-ferrules up to No. 22.
Note! All our dies are manufactured from hardened and tempered die steel for long life and durability.
The swaging operation is controlled by an electric foot pedal permitting the operator to use both hands when swaging.
In addition to the normal up/down function, the foot pedal has a "hold" position to facilitate rope/eye adjustment and to make tool set-up quicker. The retraction of the piston is limited by a time delay and a pressure valve sets maximum pressure. When left unused the automatic shut down turns off the swager. It is easily started again by pressing the foot pedal.
By setting the required pressure on the optional pressure gauge MA 250, the piston returns automatically
once the pressure is reached. This saves time and unnecessary movements for the operator.
For more information on Swage Ferrules please click here.
To contact Bridco about Swage Ferrules use Get a quote.
TALURIT single-pillar swagers swage T- and UM-ferrules, with press capacities from 18 to 150 tons and ferrule size limits that vary by model. On the higher-capacity models, the electric foot pedal’s hold setting helps operators adjust the rope or eye and speeds tool setup. The lightweight models suit field work because they are easy to operate.
- 18-ton model: T-ferrules up to No. 6 single-stage, No. 8 multi-stage
- 30-ton model: T-ferrules up to No. 8 single-stage, No. 10 multi-stage
- 75-ton, multi-stage: T-ferrules to No. 16; UM-ferrules to No. 18
- 150-ton, multi-stage: T-ferrules to No. 20; UM-ferrules to No. 22
- Dies are made from hardened and tempered die steel
Source: listing by Bridco on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Bridco on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Winches | Jaemar
Hand Winches
Hand Winches | Bridco
Swaging Machines
Shackles/Swivels
Swage Ferrules
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales