Wireteknik Swaging Machines
Wireteknik - Swaging Machines
Designed for pressing terminal fittings to steel core wire and solid rod the Wireteknik range of rollswagers are the ultimate machines.
Simple and robust design with the minimum of moving parts, make these machines both reliable and extremely
accurate, yet still remain compact and easily transportable for onsite work.
Terminals pressed in a Wireteknik rollswager come out straight without the “banana” effect often experienced with other rollswagers.
Evidence of the strength and reliability of the Wireteknik system is the approval from Lloyd’s Register of Shipping
The machines range in size from the compact A100 up to the awesome A500, capable of swaging wires up to 44mm in diameter.
A variety of power sources are available including manual hand pumps, electric pumps and air/hydraulic pumps.
WireTeknik’ have a range of roll swagers with dual Ram, this allows the user to swage rigging screws while they are still assembled, saving the user valuable time.
For more information on Wireteknik swaging machines please click here.
To contact Bridco about Wireteknik Swaging Machines use Get a quote.
Simple and robust design with the minimum of moving parts, make these machines both reliable and extremely
accurate, yet still remain compact and easily transportable for onsite work.
Terminals pressed in a Wireteknik rollswager come out straight without the “banana” effect often experienced with other rollswagers.
Evidence of the strength and reliability of the Wireteknik system is the approval from Lloyd’s Register of Shipping
The machines range in size from the compact A100 up to the awesome A500, capable of swaging wires up to 44mm in diameter.
A variety of power sources are available including manual hand pumps, electric pumps and air/hydraulic pumps.
WireTeknik’ have a range of roll swagers with dual Ram, this allows the user to swage rigging screws while they are still assembled, saving the user valuable time.
For more information on Wireteknik swaging machines please click here.
To contact Bridco about Wireteknik Swaging Machines use Get a quote.
The Wireteknik rollswager range presses terminal fittings onto steel-core wire and solid rod, handling wire up to 44 mm in diameter for terminal assembly. Pressed terminals emerge straight, avoiding the curved “banana” effect seen with other rollswagers. Their compact, transportable build supports onsite swaging work, allowing operators to take the machines to the work location.
- Models range from A100 to A500
- Dual-ram models swage rigging screws while assembled, saving time
- Power sources include manual hand pumps, electric pumps and air/hydraulic pumps
- Approved by Lloyd's Register of Shipping
- Simple construction uses a minimum of moving parts
Source: listing by Bridco on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Bridco on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Winches | Jaemar
Hand Winches
Hand Winches | Bridco
Swaging Machines
Shackles/Swivels
Swage Ferrules
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales