TAEevo Air Cooled Chiller | TAEevo Tech

TAEevo - Air Cooled Chiller | TAEevo Tech

Supplier: MTA Australasia

Air Cooled Chiller | TAEevo Tech

Air-cooled process chillers with scroll compressors - R410A.

In Stock

The evolution of perfection.

Technological innovation, absolute reliability and customer satisfaction have been MTA’s hallmarks in over 35 years in the industrial cooling market. The TAEevo Tech air cooled process chillers, specifically designed for use in industrial applications. TAEevo Tech are compact units equipped, as standard, with an internal storage tank and pump, offering a tried and tested solution that has received worldwide acclaim.

The innovative evaporator-intank configuration ensures reduced ambient heat gain and a steady temperature of the process fluids. The use of components sourced from premium manufacturers and extensive factory testing of all units make for highest reliability levels, minimising the risks of unplanned stoppages and increasing productivity levels. An extensive range of accessories, coupled with operating limits among the most generous available on the market, allow TAEevo Tech to be personalised to a variety of industrial applications.

Benefits

• The unique evaporator-in-tank configuration has been specifically designed for process
cooling applications. It allows high flow rates with low pressure drops and it is furthermore compatible with the presence of contaminated process fluids;
• Scroll compressors ensure high efficiency, excellent performance and elevated energy
savings;
• Extended operating limits: Tw in max = +35 °C; Tw out min = -10 °C; Tamb max = +46 °C;
Tamb min = -5 °C;
• All the TAEevo TECH models already meet the limits set by the ErP, for the indexes
SEPR HT (Tier 2 01/01/2021) and SEPR MT (Tier 2 02/07/2018);
• R410A refrigerant increase the performance thanks its outstanding heat conductivity;
• The oversized hydraulic tank is standard and is able to compensate for the imbalances
caused by sudden changes in load demand from the user;
• IP54 / IP44 electrical protection rate makes TAEevo Tech suitable for outdoor installation;
• Extensive range of accessories and kits, allow each unit to match the specific customer
requirements;
• Cooling circuit suitable both for atmospheric and pressurized hydraulic circuits (up
to 6 barg);
• Comprehensive safety equipment, including phase monitor pressure switches, antifreeze
sensors, level sensors, crankcase heaters and an internal hydraulic bypass circuit.

Options

• P3, P5 pumps, open circuit single P3 pump (mod.031-1002), double pumps in stand-by
P3+P3 or P5+P5 (mod. 201- 1002); SP (without pump);
• Version with painted fins against corrosion;
• Axial fans with electronic speed control by phase cut-off (mod. 031-802); centrifugal
fans (mod. 031-161); EC brushless axial fans with high head pressure (mod. 201-802);
EC brushless axial fans (mod. 902-1002);
• Anti-freezing heaters (on tank and pumps);
• Soft starter option: factory fitted (mod. 381-1002);
• Automatic hydraulic bypass option factory fitted (mod. 031-602);
• Non Ferrous option (mod. 020-802).

Standard Features

• Refrigerant R410A;
• Hermetic Scroll compressors;
• Electronic expansion valve (mod. 031-1002);
• High-efficiency finned coil evaporator with copper tubes and aluminum fins, installed
inside the water storage tank;
• Axial fans with galvanized steel blades (mod. 020) and die cast aluminum/plastic crescent-shaped blades (mod. 031-1002);
• Oversized air-cooled condensers (copper tubes /aluminium fins). Air filter standard
from mod. 031;
• Storage tank (design pressure 6 barg) complete with filling/drain valve, pressure gauge;
• Internal hydraulic bypass between the inlet and outlet connections;
• Electronic level sensor with water conductivity function;
• High and low refrigerant pressure switches;
• Refrigerant pressure gauges (mod. 031-1002);
• Parametric microprocessor control IC208CX;
• Protection rating: IP54 (mod. 031-1002); IP44 (mod. 020);
• Phase monitor;
• Compressor crankcase heater.

Kits

• Flow rate regulation kit;
• Manual filling tank kit: suitable for hydraulic circuits at atmospheric pressure;
• Automatic filling kit: suitable for pressurized hydraulic circuits (up to 6 barg);
• Remote ON/OFF kit and remote control kit (max 150 m);
• Remote control kit VICX620 display LED, VGI890 display LCD (max 150 m);
• Adapter kit for remote control VICX620 and VGI890 (necessary for mod. 381-1002);
• Supervisor kits: RS485 ModBus, xWEB300D EVO;
• Automatic hydraulic bypass kit external (mod.020-602 and 902-1002);
• Modularity kit: up to 5 units in MASTER/SLAVE.

Versions

• Version for low environmental temperature -20 °C (mod. 031-1002);
• Dual frequency version: power supply 400V/3/50 Hz - 460V/3/60 Hz (mod. 020-161);
• UL version (020-1002): power supply 460/3/60Hz;
• Close temperature control version (mod. 020-351): extremely precise regulation of the
outlet water temperature (hysteresis ± 0,5 °C).