Tetra Pak Chocolate Enrober
Tetra Pak - Chocolate Enrober
Tetra Pak® Chocolate Enrober enrobing ice cream
Tetra Pak® Chocolate Enrober is perfect for enrobing ice cream and similar products with all types of liquid coating, including small particles. The Tetra Pak Chocolate Enrober is available in five different sizes: a belt width of 385 mm, 600 mm, 1000 mm and 1300 mm (15, 16, 24, 39 and 51 inches).
The liquid coating is continuously circulated from the tank to the nozzles and dip tray. The nozzles are adjustable in all directions so that the coating curtain can be inclined at any angle and positioned to achieve a uniform enrobing of even very irregular shaped product.
We recommend that the products pass through a Tetra Pak® After-Cooler after enrobing for extra hardening. Tetra Pak Chocolate Enrober is equipped with an extremely reliable positive pump specially developed for pumping coatings.
To contact Tetra Pak about Tetra Pak Chocolate Enrober use Get a quote.
Tetra Pak® Chocolate Enrober is perfect for enrobing ice cream and similar products with all types of liquid coating, including small particles. The Tetra Pak Chocolate Enrober is available in five different sizes: a belt width of 385 mm, 600 mm, 1000 mm and 1300 mm (15, 16, 24, 39 and 51 inches).
The liquid coating is continuously circulated from the tank to the nozzles and dip tray. The nozzles are adjustable in all directions so that the coating curtain can be inclined at any angle and positioned to achieve a uniform enrobing of even very irregular shaped product.
We recommend that the products pass through a Tetra Pak® After-Cooler after enrobing for extra hardening. Tetra Pak Chocolate Enrober is equipped with an extremely reliable positive pump specially developed for pumping coatings.
To contact Tetra Pak about Tetra Pak Chocolate Enrober use Get a quote.
The Tetra Pak Chocolate Enrober applies all types of liquid coating to ice cream and similar products, including mixtures with small particles. Its nozzles adjust in every direction, letting operators angle the coating curtain to cover even irregularly shaped products evenly. For ice-cream production, Tetra Pak recommends passing coated products through an After-Cooler for extra hardening.
- Coating circulates continuously from the tank to the nozzles and dip tray
- Positive pump developed specifically to pump coatings
Source: listing by Tetra Pak on IndustrySearch · Updated 31 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Tetra Pak on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Ice Cream Moulding Machine
Continuous Freezer LT
LT Ice Cream Filling Machine
Extrusion Tunnel A3
Cheese Processing Machine | Blockformer System 6
Pasteuriser D Base
High Shear Mixer - Batch Unit
Tube Heat Exchanger
Food Dosing Machine | Aseptic Dosing unit E
Chocolate Enrober
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales