Timing Pulley
Timing Pulley
Our Timing Belts are driven through teeth that mesh with slots in a pulley which prevents slipping and vibrations allowing accurate timing of drives.
Our Timing Belts require no lubrication making them more cost effective to set-up and maintain as opposed to chain driven systems. We also supply rubber belts to go along with all our pulleys.
Pulleys are available in both pilot bore and taper bore and clamp plates (for longer belting) are also available.
|
Pitch |
Widths |
|
| XL (Extra Light) | 0.200" (1/5") | 3/8" |
| L (Light) | 0.375" (3/8") | 1/2" & 1" |
| H (Heavy) | 0.500" (1/2") | 1", 1 1/2", 2" & 3" |
| XH (Extra Heavy) | 0.875" (7/8") | 2" & 3 |
HTD Timing Pulleys:
SAMT HTD Timing Pulleys allow higher torque and speeds compared to our standard range of timing pulleys. Through optimised load distribution, high power transmission in low speed and high torque applications are achieved. We also supply rubber belts to go along with all our pulleys.
Pulleys are available in both pilot bore and taper bore and clamp plates (for longer belting) are also available.
| Pitch |
Widths |
| 3mm | 15mm |
| 5mm | 15mm & 25mm |
| 8mm | 20mm, 30mm, 50mm & 85mm |
| 14mm | 40mm, 55mm, 85mm & 115m |
To contact Specialised Air Motors & Transmission about Timing Pulley use Get a quote.
Our Timing Belts require no lubrication making them more cost effective to set-up and maintain as opposed to chain driven systems. We also supply rubber belts to go along with all our pulleys.
Pulleys are available in both pilot bore and taper bore and clamp plates (for longer belting) are also available.
|
Pitch |
Widths |
|
| XL (Extra Light) | 0.200" (1/5") | 3/8" |
| L (Light) | 0.375" (3/8") | 1/2" & 1" |
| H (Heavy) | 0.500" (1/2") | 1", 1 1/2", 2" & 3" |
| XH (Extra Heavy) | 0.875" (7/8") | 2" & 3 |
HTD Timing Pulleys:
SAMT HTD Timing Pulleys allow higher torque and speeds compared to our standard range of timing pulleys. Through optimised load distribution, high power transmission in low speed and high torque applications are achieved. We also supply rubber belts to go along with all our pulleys.
Pulleys are available in both pilot bore and taper bore and clamp plates (for longer belting) are also available.
| Pitch |
Widths |
| 3mm | 15mm |
| 5mm | 15mm & 25mm |
| 8mm | 20mm, 30mm, 50mm & 85mm |
| 14mm | 40mm, 55mm, 85mm & 115m |
To contact Specialised Air Motors & Transmission about Timing Pulley use Get a quote.
Pressure Tanks - Stainless Steel
Fluid Couplings - Constant Fill - Scoop Control
Clutch/Clutches - Brakes - Air - Mechanical
Air Diaphragm Pumps - Aluminium - Stainless Steel - Polypropylene
Air Fans - Stand - Bench - Wall Mount - Blower - Axial Fan
DC Motors - Brushed - Battery -Traction - IEC - NEMA
Industrial Chains
Sprockets - Pilot bore - Taper Lock - Plate - Idler
Coupling Range - HRC - Jaw - Tyre - Gear
Mechanical Variators
HTD Timing Belts
Wedge & Vee Belts
Explosion-Proof Motors
NEMA Standard Electric Motor - Low Voltage (LV)
IEC Standard Electric Motor - Low Voltage (LV)
1Ph AC Electric Motors
IBC Tank Mixer - Air and Electric
Hand Held Mixers - Air and Electric
Drum Mixers - Electric and Air
Air Mixers - Mobile and Stand Mixers
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales