Ucontrol | Advance Digital Panel Meters | TRUAMP

Application:

TRUAMP Digital Panel Meters  for Truamp 4-20 mA, 0-10v input signals

Key Features & Benefits:

• Accuracy of 0.1% or better is now achieved, allowing for more precise measurement, digital display and control. Non-linear sensors, such as thermocouples and pressure transducers, can also be used thanks to the new APM Configurator application that allows the user to configure upto 20 points in a non-linear conversion table.
• Programmable scale
• Custom annunciators means the user can tailor  the meter to display their critical parameters exactly how they want
• Two outputs can be used to control the other systems in the process, meaning the APM process meter  is much more than just a display
• Greater level of accuracy to the APM range through input signal optimization. Accuracy of 0.1% or better is now achieved, allowing for more precise measurement, digital display and control.
• Non-linear sensors, such as thermocouples and pressure transducers, can also be used
• Allows the user to configure upto 20 points in a non-linear conversion table
•  The 4-20mA analog output from the fluid level sensor is scaled to gallons, and the custom annunciator set to "Gal", all via the easy-to-use software application. High and low setpoints are configured so that the normal green display will flash red when the tank is too full or empty, thereby alerting the operator. Additionally, the APM digital outputs are integrated into the tank pumping system and the tank is automatically drained or filled if the setpoints are exceeded.

Specifications:

INPUT VOLTAGE 
Range (DC) VOLTAGE 0 to +/-10VDC CURRENT 0 - 50mA
Impedance VOLTAGE100 Kohms CURRENT 15 ohms
Accuracy VOLTAGE0.1% CURRENT 0.01%
ENVIRONMENTAL
Temperature - operating -10 to +60 degC
Temperature - storage -40 to +70 degC
IP rating (from the front) IP65
POWER SUPPLY
Nominal Input (AC or DC) 12-24 VAC/VDC
DISPLAY
Number of digits 4
Digit height 12mm [0.47"]
Number of message characters 4
Backlight colours Red, Green, White
LCD display Positive or Negative
OUTPUTS
Max voltage 24V
Max current 500mA
Analogue output 4-20mA
CERTIFICATION UL and cUL, CE