Ucontrol Current Transformer Seneca - ...

Ucontrol Current Transformer Seneca - T201DC CT

Supplier: Ucontrol

T201DC is an isolated, DIN rail mount, contact-less DC current transformer / CT using pioneering inductive measurement technology, with loop powered current loop analog signal.

33 Recent Views Call for more details

PATENT MEASUREMENT TECHNOLOGY
High precision (0,2%)
Configurable input from 5 to 40 Adc
Output 4..20 mA (loop powered)
Compact size: 38 x 40 x 20 mm (Ø 12,5 mm)
Suitable for batteries, battery chargers, Solar Panels, power units and generic dc loads.

Accuracy class | 0.2 | 0.1% + 14 µA (measure) 0.05% + 4 µA (output)
Max error Coeff. temperatura < 150 ppm/K EMI error < 50 µA 100 ms (without filter) 600 ms (with filter)
Response time Protection degree IP 20
Operating temperature -10..+65°C
Humidity 10..90% non condensing
Weight 47 g
Dimensions 38 x 40 x 20 mm
Enclosure PBT, black
Mouting DIN rail guide
Configuration DIP-switches (range, filter)
Norms CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1, EN 60742

Input

Connetion Passing- through hole
Hole diameter - 12,5mm, 1/2 “
Range Monopolar : 0..5 / 0..10 / 0..20 / 0..40 A Bipolar: -5..+5 / -10..+10 / -5..+20 / -10..+40A
Maximum rating > 1.000 A ± 300 A (correct reading range)
AC overlying (f > 35 Hz) -15..+50 A (allowable peak value) -10..+32 A (Full-wawe rectified) -5..+16 A (Half-wawe rectified)
Isolation When a sheathed wire is used, the insulation voltage is set by sheath properties. It’s stated 1 KVdc

Output:

Type - Passive current loop 4..20 mA
Terminals - Screw terminal pitch 5.08mm for max 2.5mm2 cables
Min, voltage - 6v
Max voltage - 30 V (directly wired) 100 V (with added resistor) 120 V (pulsed, directly wired)
Other protection - Polarity reversal. Loop current limiting on hardware fault. Over-temperature
Max power dissipation - 650 mW continuous. 2.5 W pulsed (10 s). 1500 W.ms on surge (500 V, 40 )

PATENT MEASUREMENT TECHNOLOGY
High precision (0,2%)
Configurable input from 5 to 40 Adc
Output 4..20 mA (loop powered)
Compact size: 38 x 40 x 20 mm (Ø 12,5 mm)
Suitable for batteries, battery chargers, Solar Panels, power units and generic dc loads.

Accuracy class | 0.2 | 0.1% + 14 µA (measure) 0.05% + 4 µA (output)
Max error Coeff. temperatura < 150 ppm/K EMI error < 50 µA 100 ms (without filter) 600 ms (with filter)
Response time Protection degree IP 20
Operating temperature -10..+65°C
Humidity 10..90% non condensing
Weight 47 g
Dimensions 38 x 40 x 20 mm
Enclosure PBT, black
Mouting DIN rail guide
Configuration DIP-switches (range, filter)
Norms CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1, EN 60742

Input

Connetion Passing- through hole
Hole diameter - 12,5mm, 1/2 “
Range Monopolar : 0..5 / 0..10 / 0..20 / 0..40 A Bipolar: -5..+5 / -10..+10 / -5..+20 / -10..+40A
Maximum rating > 1.000 A ± 300 A (correct reading range)
AC overlying (f > 35 Hz) -15..+50 A (allowable peak value) -10..+32 A (Full-wawe rectified) -5..+16 A (Half-wawe rectified)
Isolation When a sheathed wire is used, the insulation voltage is set by sheath properties. It’s stated 1 KVdc

Output:

Type - Passive current loop 4..20 mA
Terminals - Screw terminal pitch 5.08mm for max 2.5mm2 cables
Min, voltage - 6v
Max voltage - 30 V (directly wired) 100 V (with added resistor) 120 V (pulsed, directly wired)
Other protection - Polarity reversal. Loop current limiting on hardware fault. Over-temperature
Max power dissipation - 650 mW continuous. 2.5 W pulsed (10 s). 1500 W.ms on surge (500 V, 40 )

To contact Ucontrol about Ucontrol Current Transformer Seneca - T201DC CT use Get a quote.