Warthog Parts Washer | Workshop Washer ...

Warthog - Parts Washer | Workshop Washer 1200

Supplier: Warthog & Rhino Parts Washers

Parts Washer | Workshop Washer 1200

The 1200 mm basket is our largest production model and is built for high usage workshops with high volumes and heavy workloads. Truck, transport and bus companies are all advocates of this larger model.

Receive 1-3 days from order

Two Washers in One

A Hand Washer: When there is just that one piece of equipment to clean, when time is pressing or there is not enough gear to make up a decent load, the hand washer can seem like the ideal companion to the automatic washer. That’s why the Warthog has an inbuilt ‘flow-through’ brush that can be used in an open Warthog as if it were a hand washer. That’s right the automatic Warthog doubles as a hand-washer simply by lifting the lid.
An Automatic Washer: But if you have reasonable workloads or large pieces of equipment to wash then the automatic washers are the ‘heavy hitters’, cleaning gear while your crew get on with other work. The Warthog automatic washer becomes another crew member doing best what it is designed to do, wash while your mechanics work. But because there is a place for both a hand washer and an automatic washer in almost every workshop we built the Warthog to be dual purpose.

Features of the Product

Warthog Washers are manufactured right here in Australia using high quality components and innovative technology
Hinged, easy-lift, fully locking hydraulic lid (will not slam shut)
Filter extracts solids from the fluid stream extending the life of the degreaser
High-volume fluid pump recycles Enviroclean Degreaser at 100 litres per minute
Manual and automatic option timeout switch (with multi-adjustable cycle times)
12 high-pressure jets direct a constant stream of degreaser into the chamber
A separate motor rotates the basket through the fluid stream at 10 rpm
The rotating basket exposes contents to a complete 360 degree fluid coverage
Combative rubber seals create a completely leak proof shower chamber
A Little Giant pump powers solution to a manual ‘hand-brush’ option

Advantages of Cold Wash

Cold wash can clean: Hot water washers are great for gear housings with built up dust and grease – what they are not good for is internal parts, bearings and transmissions where rust, rust inhibitors and anything abrasive will cause more damage. If you have a hot water washer you must finish with a cold wash to remove potentially damaging caustic residue. A cold wash is a cleaner wash.
It’s safer for staff: There are enough hazards in a workshop without the added risk of inhaling caustic steam or burns from super hot parts. Cold washers are kinder on your crew, a Warthog lowers the risks and creates a safer workplace.
It’s cheaper to run: Sick of the power bills? All day hot water is expensive. A cold washer brings the power bills right down and your water rates as well. Your Warthog will be a money miser, your accountant will love him too.
It’s kinder on the environment: The environment will love you as well. Enviroclean Degreaser is recoverable, re-cleanable and reusable. We will collect your waste and deliver fresh ‘re-powered’ solution to keep you pumping out pristine clean work day after day.

To contact Warthog & Rhino Parts Washers about Warthog Parts Washer | Workshop Washer 1200 use Get a quote.

Two Washers in One

A Hand Washer: When there is just that one piece of equipment to clean, when time is pressing or there is not enough gear to make up a decent load, the hand washer can seem like the ideal companion to the automatic washer. That’s why the Warthog has an inbuilt ‘flow-through’ brush that can be used in an open Warthog as if it were a hand washer. That’s right the automatic Warthog doubles as a hand-washer simply by lifting the lid.
An Automatic Washer: But if you have reasonable workloads or large pieces of equipment to wash then the automatic washers are the ‘heavy hitters’, cleaning gear while your crew get on with other work. The Warthog automatic washer becomes another crew member doing best what it is designed to do, wash while your mechanics work. But because there is a place for both a hand washer and an automatic washer in almost every workshop we built the Warthog to be dual purpose.

Features of the Product

Warthog Washers are manufactured right here in Australia using high quality components and innovative technology
Hinged, easy-lift, fully locking hydraulic lid (will not slam shut)
Filter extracts solids from the fluid stream extending the life of the degreaser
High-volume fluid pump recycles Enviroclean Degreaser at 100 litres per minute
Manual and automatic option timeout switch (with multi-adjustable cycle times)
12 high-pressure jets direct a constant stream of degreaser into the chamber
A separate motor rotates the basket through the fluid stream at 10 rpm
The rotating basket exposes contents to a complete 360 degree fluid coverage
Combative rubber seals create a completely leak proof shower chamber
A Little Giant pump powers solution to a manual ‘hand-brush’ option

Advantages of Cold Wash

Cold wash can clean: Hot water washers are great for gear housings with built up dust and grease – what they are not good for is internal parts, bearings and transmissions where rust, rust inhibitors and anything abrasive will cause more damage. If you have a hot water washer you must finish with a cold wash to remove potentially damaging caustic residue. A cold wash is a cleaner wash.
It’s safer for staff: There are enough hazards in a workshop without the added risk of inhaling caustic steam or burns from super hot parts. Cold washers are kinder on your crew, a Warthog lowers the risks and creates a safer workplace.
It’s cheaper to run: Sick of the power bills? All day hot water is expensive. A cold washer brings the power bills right down and your water rates as well. Your Warthog will be a money miser, your accountant will love him too.
It’s kinder on the environment: The environment will love you as well. Enviroclean Degreaser is recoverable, re-cleanable and reusable. We will collect your waste and deliver fresh ‘re-powered’ solution to keep you pumping out pristine clean work day after day.

Read less...

To contact Warthog & Rhino Parts Washers about Warthog Parts Washer | Workshop Washer 1200 use Get a quote.

AI Overview BETA

The Warthog Workshop Washer 1200 is a parts washer that cleans workshop equipment in a 1,200 mm basket. Its built-in flow-through brush also works as a hand washer when the lid is raised, letting staff clean one-off items by hand. Truck, transport and bus companies are named advocates, and the model is built for workshops handling high volumes and heavy workloads.

Hinged hydraulic lid lifts easily, locks fully and will not slam shut
High-volume pump recirculates Enviroclean Degreaser at 100 litres per minute
12 high-pressure jets direct degreaser into the wash chamber
Separate motor rotates the basket at 10 rpm for 360-degree fluid coverage
Filter removes solids from the fluid stream, extending degreaser life

Source: listing by Warthog & Rhino Parts Washers on IndustrySearch · Updated 27 Oct 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Warthog & Rhino Parts Washers provide you with a quote

Supplier

Supplier: Warthog & Rhino Parts Washers

Location: Margaret River, WA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Warthog & Rhino Parts Washers are also proudly displaying these credentials:

Location:

Margaret River , WA

Joined:

May 2026

Level:

Premium Storefront

Verified:

Is this your product? Manage products / company details |

Report this product