Warthog - Parts Washer | Workshop Washer 600

Read more...

To contact Warthog & Rhino Parts Washers about Warthog Parts Washer | Workshop Washer 600 use Get a quote.

Most who trial a 600 keep them even when they upgrade to larger washers. They are an ideal companion to a hot wash; a final clean-up to remove caustic film from internal parts.

Two Washers in One

• A Hand Washer: When there is just that one piece of equipment to clean, when time is pressing or there is not enough gear to make up a decent load, the hand washer can seem like the ideal companion to the automatic washer. That’s why the Warthog has an inbuilt ‘flow-through’ brush that can be used in an open Warthog as if it were a hand washer.  That’s right the automatic Warthog doubles as a hand-washer simply by lifting the lid.
• An Automatic Washer: But if you have reasonable workloads or large pieces of equipment to wash then the automatic washers are the ‘heavy hitters’, cleaning gear while your crew get on with other work.   The Warthog automatic washer becomes another crew member doing best what it is designed to do, wash while your mechanics work. But because there is a place for both a hand washer and an automatic washer in almost every workshop we built the Warthog to be dual purpose.

Features of the Product

• Warthog Washers are manufactured right here in Australia using high quality components and innovative technology
• Hinged, easy-lift, fully locking hydraulic lid (will not slam shut)
• Filter extracts solids from the fluid stream extending the life of the degreaser
• High-volume fluid pump recycles Enviroclean Degreaser at 100 litres per minute
• Manual and automatic option timeout switch (with multi-adjustable cycle times)
• A massive 120 litre Enviroclean Degreaser reservoir (Warthog 600)
• 12 high-pressure jets direct a constant stream of degreaser into the chamber
• A separate motor rotates the basket through the fluid stream at 10 rpm
• The rotating basket exposes contents to a complete 360 degree fluid coverage
• Combative rubber seals create a completely leak proof shower chamber
• A Little Giant pump powers solution to a manual ‘hand-brush’ option

Advantages of Cold Wash

• Cold wash can clean: Hot water washers are great for gear housings with built up dust and grease – what they are not good for is internal parts, bearings and transmissions where rust, rust inhibitors and anything abrasive will cause more damage. If you have a hot water washer you must finish with a cold wash to remove potentially damaging caustic residue. A cold wash is a cleaner wash.
• It’s safer for staff: There are enough hazards in a workshop without the added risk of inhaling caustic steam or burns from super hot parts. Cold washers are kinder on your crew, a Warthog lowers the risks and creates a safer workplace.
• It’s cheaper to run: Sick of the power bills? All day hot water is expensive. A cold washer brings the power bills right down and your water rates as well. Your Warthog will be a money miser, your accountant will love him too.
• It’s kinder on the environment: The environment will love you as well. Enviroclean Degreaser is recoverable, re-cleanable and reusable. We will collect your waste and deliver fresh ‘re-powered’ solution to keep you pumping out pristine clean work day after day.

Read less...

To contact Warthog & Rhino Parts Washers about Warthog Parts Washer | Workshop Washer 600 use Get a quote.