Gatekeeper - ADSL Phone Line Surge Protection Systems | LDU

Range of LDU Phone Line Protection Systems:

• GKRJ11-ADSL-4 - The GKRJ11-ADSL-4 is the ideal protection for all ADSL, ADSL2 and ADSL2 PLUS applications
• GKRJ11-ADSL-2 - The GKRJ11-ADSL-2 is a low end SPD for ADSL applications

Telephone, fax, and modem lines are highly susceptible to induced transient overvoltages caused by lightning strikes and other voltage disturbances. These transients may be directly induced in the cabling or may be caused by differential earth voltages due to mains voltage disturbances. The GATEKEEPER GKRJ12/45 range is specially designed for the protection of single line telephone, fax, modem or similar devices.

Operation

The GATEKEEPER GKRJ12/45 SPD is an in-line device, which may be inserted in the existing line to protect the equipment. It fits inline with the standard patch cord.

Installation

Place the protector in line with the RJ11/RJ12/RJ45 patch cord at the wall socket or switch. If installed within a rack, attach the earth cable to the rack frame.

Need more information? Message Lightning Down Under Pty Ltd via the form, or call and say you found them on IndustrySearch so they can best assist you.

Range of LDU Phone Line Protection Systems:

• GKRJ11-ADSL-4 - The GKRJ11-ADSL-4 is the ideal protection for all ADSL, ADSL2 and ADSL2 PLUS applications
• GKRJ11-ADSL-2 - The GKRJ11-ADSL-2 is a low end SPD for ADSL applications

Telephone, fax, and modem lines are highly susceptible to induced transient overvoltages caused by lightning strikes and other voltage disturbances. These transients may be directly induced in the cabling or may be caused by differential earth voltages due to mains voltage disturbances. The GATEKEEPER GKRJ12/45 range is specially designed for the protection of single line telephone, fax, modem or similar devices.

Operation

The GATEKEEPER GKRJ12/45 SPD is an in-line device, which may be inserted in the existing line to protect the equipment. It fits inline with the standard patch cord.

Installation

Place the protector in line with the RJ11/RJ12/RJ45 patch cord at the wall socket or switch. If installed within a rack, attach the earth cable to the rack frame.

Read less...

Need more information? Message Lightning Down Under Pty Ltd via the form, or call and say you found them on IndustrySearch so they can best assist you.