Air Knife System

Air Knife System | DYNAFastFit

Supplier: Dyna Engineering

Air Knife System | DYNAFastFit

DYNAFastFit® air knives are used to clean belts by delivering an air stream across the belt to blow away fine dust particles.

Receive 1-3 days from order

Usually used for difficult to remove or fine dust materials, DYNAFastFit® air knives are fitted instead of scrapers or other types of cleaners.

They are normally located in the secondary scraper position.

Care should be taken to ensure the chute has sufficient ventilation to allow the air flow from the air knife to be adequately vented.

DYNAFastFit® air knives cater for various applications, duties, air flows, spray patterns and are available in stainless steel construction.

To contact Dyna Engineering about Air Knife System | DYNAFastFit use Get a quote.

Usually used for difficult to remove or fine dust materials, DYNAFastFit® air knives are fitted instead of scrapers or other types of cleaners.

They are normally located in the secondary scraper position.

Care should be taken to ensure the chute has sufficient ventilation to allow the air flow from the air knife to be adequately vented.

DYNAFastFit® air knives cater for various applications, duties, air flows, spray patterns and are available in stainless steel construction.

Read less...

To contact Dyna Engineering about Air Knife System | DYNAFastFit use Get a quote.

AI Overview BETA

Dyna Engineering’s DYNAFastFit air knife system cleans belts by directing an air stream across the belt surface to blow away fine dust particles. Different air flows and spray patterns suit a range of applications and duties. For difficult-to-remove or fine dust, it replaces scrapers or other cleaners and normally sits in the secondary scraper position.