Centrifugal Fan | Air Handling Unit (AHU) ...

Centrifugal Fan | Air Handling Unit (AHU) - Ventilation

Supplier: Fan & Blower Australia

1/4

Designed to appeal to fan buyers looking for a less expensive double width, double inlet centrifugal fan option. These fans are sourced from overseas, providing a DWDI fan that is suitable for AHU’s with an impeller up to 1000mm.

26 Recent Views In Stock

Their performance is similar to FBA’s 1000 Series DWDI fans.

AHU Fans are imported as ‘bare shaft’ versions. The final fitting of the drive, motor and belt guard to a fabricated channel base are all completed at our Parramatta works.

These fans have the following characteristics:

Well-constructed
Housings are completely manufactured in galvanised steel sheet
Pittsbourgh seam locked scroll and sideplates
High efficiency impeller with 10 backward curved true aerofoil shaped fully welded blades coated with epoxy paint
Balanced both statically and dynamically to an accuracy grade of G=2.5.
Fitted with roller bearings with Plummer split block housings
Supplied with inlet, shaft and belt guards.
Supplied and mounted on a strong, channel base.

All AHU fans are test run upon completion, enabling a check to be made on bearing temperature, impeller balance and speed, ensuring that the correct pulleys have been selected.

To contact Fan & Blower Australia about Centrifugal Fan | Air Handling Unit (AHU) - Ventilation use Get a quote.

Their performance is similar to FBA’s 1000 Series DWDI fans.

AHU Fans are imported as ‘bare shaft’ versions. The final fitting of the drive, motor and belt guard to a fabricated channel base are all completed at our Parramatta works.

These fans have the following characteristics:

Well-constructed
Housings are completely manufactured in galvanised steel sheet
Pittsbourgh seam locked scroll and sideplates
High efficiency impeller with 10 backward curved true aerofoil shaped fully welded blades coated with epoxy paint
Balanced both statically and dynamically to an accuracy grade of G=2.5.
Fitted with roller bearings with Plummer split block housings
Supplied with inlet, shaft and belt guards.
Supplied and mounted on a strong, channel base.

All AHU fans are test run upon completion, enabling a check to be made on bearing temperature, impeller balance and speed, ensuring that the correct pulleys have been selected.

Read less...

To contact Fan & Blower Australia about Centrifugal Fan | Air Handling Unit (AHU) - Ventilation use Get a quote.