Centrifugal Fan | Series 1000 DWDI Fans ...

Centrifugal Fan | Series 1000 DWDI Fans - Ventilation

Supplier: Fan & Blower Australia

1/5

Series 1000 Double Width Double Inlet (DWDI) fans are used primarily in air handling units or in plenum chambers where the connection of the inlet duct directly to the fan is not a requirement.

13 Recent Views In Stock

A similar size DWDI fan will produce approximately double the volume at the same static pressure as an SWSI fan.

This is an important advantage when space considerations limit the available height but allow ample floor space.

These fans share the identical impeller and case profile with that of the SWSI fans. They therefore have the same absorbed power, efficiency and non-overloading characteristics.

DWDI fans can be supplied in various arrangements as noted on our fan handing sheet, and can be constructed to operate at temperatures up to 400°C.

A range of optional extras, including various types of metal, such as stainless steel, are available. These fans can be made suitable for smoke spill applications, subject to meeting appropriate standards.

To contact Fan & Blower Australia about Centrifugal Fan | Series 1000 DWDI Fans - Ventilation use Get a quote.

A similar size DWDI fan will produce approximately double the volume at the same static pressure as an SWSI fan.

This is an important advantage when space considerations limit the available height but allow ample floor space.

These fans share the identical impeller and case profile with that of the SWSI fans. They therefore have the same absorbed power, efficiency and non-overloading characteristics.

DWDI fans can be supplied in various arrangements as noted on our fan handing sheet, and can be constructed to operate at temperatures up to 400°C.

Read less...

To contact Fan & Blower Australia about Centrifugal Fan | Series 1000 DWDI Fans - Ventilation use Get a quote.

AI Overview BETA

The Series 1000 DWDI fan is a centrifugal fan used to move air. Compared with a similar-sized SWSI fan, it produces approximately twice the air volume at the same static pressure, helping where height is limited but floor space is available. Air-handling units and plenum chambers suit this fan where the inlet duct need not connect directly to it.

Shares SWSI fans’ absorbed power, efficiency and non-overloading characteristics
Operates at temperatures up to 400°C
Available in various arrangements shown on the fan handing sheet
Optional metal choices include stainless steel
Can be made suitable for smoke-spill applications, subject to appropriate standards

Source: listing by Fan & Blower Australia on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Fan & Blower Australia provide you with a quote