Industrial Centrifugal Fan | Mill Exhaust – Material Handling Fans

Mill Exhaust Features

• The mill exhaust series has a choice of two impeller designs
  • "Paddle Wheel" - The most commonly used impeller. This impeller has eight radial blades welded to a fabricated steel spider and is suitable for conveying wood chips, sawdust and all types of granular material, and for exhausting buffing wheel and abrasive dust.
  • “Wool Wheel” - The second choice of impeller, with similar characteristics as the open paddle but with the addition of a backplate. It is used for applications requiring the conveying of fibrous or stringy materials such as paper trim, rags, long wood shavings etc. These materials have a tendency to wrap round the shaft of the open paddle type and clog the unit. The inclusion of a backplate obviates this possibility.
• Impellers have flat radial blade surfaces that, are easy to clean and reduce material deposit or build up. Wear plates can be fitted to the blades if required.
• The rugged construction of the complete fan assembly provides a design for the heaviest industrial uses, with impeller diameters ranging from 310mm to 1680mm.
• A full range of standard accessories is available. Fans can be constructed to operate at temperatures up to 400°C.

To contact Fan & Blower Australia about Industrial Centrifugal Fan | Mill Exhaust – Material Handling Fans use Get a quote.

Mill Exhaust Features

• The mill exhaust series has a choice of two impeller designs
  • "Paddle Wheel" - The most commonly used impeller. This impeller has eight radial blades welded to a fabricated steel spider and is suitable for conveying wood chips, sawdust and all types of granular material, and for exhausting buffing wheel and abrasive dust.
  • “Wool Wheel” - The second choice of impeller, with similar characteristics as the open paddle but with the addition of a backplate. It is used for applications requiring the conveying of fibrous or stringy materials such as paper trim, rags, long wood shavings etc. These materials have a tendency to wrap round the shaft of the open paddle type and clog the unit. The inclusion of a backplate obviates this possibility.
• Impellers have flat radial blade surfaces that, are easy to clean and reduce material deposit or build up. Wear plates can be fitted to the blades if required.
• The rugged construction of the complete fan assembly provides a design for the heaviest industrial uses, with impeller diameters ranging from 310mm to 1680mm.
• A full range of standard accessories is available. Fans can be constructed to operate at temperatures up to 400°C.

Read less...

To contact Fan & Blower Australia about Industrial Centrifugal Fan | Mill Exhaust – Material Handling Fans use Get a quote.