Nicotra Gebhardt - Centrifugal Fan | PFP Plug Fan

It is an ultra-compact (EC) plug fan with backward blades (PFP) equipped with motorized lightweight high-efficiency aluminimum impeller with matching inlet nozzle, loose, suitable for horizontal or vertical installation, specifically developed and optimized for use without a scroll case.

Features

• External rotor motor
• Integrated controller
• High-efficiency motor with rare-earth magnets
• Impeller sizes 280 – 630
• Max. motor power 4kW

Advance Controller Specifications

• All single-phase models comply with EMC emission requirements for EN 61800-3 class C. Three-phase models comply with the emission requirements for class C2; both types comply with immunity requirements for class C3.
• Can operate in PID mode, adjusting fan speed to keep the measurement of a system parameter to the desired value, via 2 analogue inputs, and an external transducer.
• Operation at constant flow-rate can be achieved using the PID mode and a pressure transducer, connected with the pressure probe provided on the inlet nozzle.
• Speed control via external voltage signal.
• ModBus / RS485 serial interface.
• 10V and 24V power supply for external transducers.
• Master & slave mode, for stable operation in parallel.

To contact Regal Australia about Nicotra Gebhardt Centrifugal Fan | PFP Plug Fan use Get a quote.

It is an ultra-compact (EC) plug fan with backward blades (PFP) equipped with motorized lightweight high-efficiency aluminimum impeller with matching inlet nozzle, loose, suitable for horizontal or vertical installation, specifically developed and optimized for use without a scroll case.

Features

• External rotor motor
• Integrated controller
• High-efficiency motor with rare-earth magnets
• Impeller sizes 280 – 630
• Max. motor power 4kW

Advance Controller Specifications

• All single-phase models comply with EMC emission requirements for EN 61800-3 class C. Three-phase models comply with the emission requirements for class C2; both types comply with immunity requirements for class C3.
• Can operate in PID mode, adjusting fan speed to keep the measurement of a system parameter to the desired value, via 2 analogue inputs, and an external transducer.
• Operation at constant flow-rate can be achieved using the PID mode and a pressure transducer, connected with the pressure probe provided on the inlet nozzle.
• Speed control via external voltage signal.
• ModBus / RS485 serial interface.
• 10V and 24V power supply for external transducers.
• Master & slave mode, for stable operation in parallel.

Read less...

To contact Regal Australia about Nicotra Gebhardt Centrifugal Fan | PFP Plug Fan use Get a quote.