Nicotra Gebhardt - Centrifugal Fan | PFP Plug Fan

It is an ultra-compact (EC) plug fan with backward blades (PFP) equipped with motorized lightweight high-efficiency aluminimum impeller with matching inlet nozzle, loose, suitable for horizontal or vertical installation, specifically developed and optimized for use without a scroll case.

Features

• External rotor motor
• Integrated controller
• High-efficiency motor with rare-earth magnets
• Impeller sizes 280 – 630
• Max. motor power 4kW

Advance Controller Specifications

• All single-phase models comply with EMC emission requirements for EN 61800-3 class C. Three-phase models comply with the emission requirements for class C2; both types comply with immunity requirements for class C3.
• Can operate in PID mode, adjusting fan speed to keep the measurement of a system parameter to the desired value, via 2 analogue inputs, and an external transducer.
• Operation at constant flow-rate can be achieved using the PID mode and a pressure transducer, connected with the pressure probe provided on the inlet nozzle.
• Speed control via external voltage signal.
• ModBus / RS485 serial interface.
• 10V and 24V power supply for external transducers.
• Master & slave mode, for stable operation in parallel.

Need more information? Message Regal Australia via the form, or call and say you found them on IndustrySearch so they can best assist you.

It is an ultra-compact (EC) plug fan with backward blades (PFP) equipped with motorized lightweight high-efficiency aluminimum impeller with matching inlet nozzle, loose, suitable for horizontal or vertical installation, specifically developed and optimized for use without a scroll case.

Features

• External rotor motor
• Integrated controller
• High-efficiency motor with rare-earth magnets
• Impeller sizes 280 – 630
• Max. motor power 4kW

Advance Controller Specifications

• All single-phase models comply with EMC emission requirements for EN 61800-3 class C. Three-phase models comply with the emission requirements for class C2; both types comply with immunity requirements for class C3.
• Can operate in PID mode, adjusting fan speed to keep the measurement of a system parameter to the desired value, via 2 analogue inputs, and an external transducer.
• Operation at constant flow-rate can be achieved using the PID mode and a pressure transducer, connected with the pressure probe provided on the inlet nozzle.
• Speed control via external voltage signal.
• ModBus / RS485 serial interface.
• 10V and 24V power supply for external transducers.
• Master & slave mode, for stable operation in parallel.

Read less...

Need more information? Message Regal Australia via the form, or call and say you found them on IndustrySearch so they can best assist you.