Combustion Lab Training Simulator and Test ...
Combustion Lab Training Simulator and Test Unit C492
Combustion Lab Unit C492 introduced by Bestech Australia enables students to grasp the fundamentals and study many aspects of combustion and burner operations using similar burners used in commercial operations.
This lab unit uses light oils or gases dependant on which burner is being used. The lab unit is framed mounted and fully instrumented requiring only a conventional single phase electrical supply, cooling water and the chosen fuel.
The lab unit also comes fully incorporated with its own safety features to reduce the probability of any accidents occurring or safety protocols being compromised. An optional high specification gas analyser is also available which allows an investigation of CO, NO and SO2 in conjunction with the standard analysis.
The Combustion Lab Unit C492 frame mount allows easy access to the burner, controls and combustion chamber. The package burner starts with an air purge, igniting the fuel source as the lab unit is automatically set to a safe setting. The flame burns within a stainless steel combustion chamber, with observation windows implemented to allow viewing access, which is water cooled to prevent flame impingement under normal conditions.
The Combustion Lab Unit C492 is ideal for those concerned with the combustion of fuels and energy conservation and is now available in Australia and New Zealand from Bestech Australia Pty Ltd.
Please contact for more information.
To contact Bestech Australia about Combustion Lab Training Simulator and Test Unit C492 use Get a quote.
This lab unit uses light oils or gases dependant on which burner is being used. The lab unit is framed mounted and fully instrumented requiring only a conventional single phase electrical supply, cooling water and the chosen fuel.
The lab unit also comes fully incorporated with its own safety features to reduce the probability of any accidents occurring or safety protocols being compromised. An optional high specification gas analyser is also available which allows an investigation of CO, NO and SO2 in conjunction with the standard analysis.
The Combustion Lab Unit C492 frame mount allows easy access to the burner, controls and combustion chamber. The package burner starts with an air purge, igniting the fuel source as the lab unit is automatically set to a safe setting. The flame burns within a stainless steel combustion chamber, with observation windows implemented to allow viewing access, which is water cooled to prevent flame impingement under normal conditions.
The Combustion Lab Unit C492 is ideal for those concerned with the combustion of fuels and energy conservation and is now available in Australia and New Zealand from Bestech Australia Pty Ltd.
Please contact for more information.
To contact Bestech Australia about Combustion Lab Training Simulator and Test Unit C492 use Get a quote.
The Combustion Lab Unit C492 is a framed, instrumented training unit for studying combustion and burner operation with burners like those used in commercial operations. Its package burner purges air before ignition, with the unit automatically set to a safe setting. For those concerned with fuel combustion and energy conservation, observation windows let them view the flame inside the water-cooled stainless steel chamber.
- Uses light oils or gases, depending on the burner
- Optional gas analyser supports investigation of CO, NO and SO₂ alongside standard analysis
- Requires a single-phase electrical supply, cooling water and the chosen fuel
- Frame mount provides access to the burner, controls and combustion chamber
- Built-in safety features reduce the chance of accidents or compromised safety protocols
Source: listing by Bestech Australia on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Bestech Australia on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
POG 10 – HeavyDuty Incremental Encoder (Euro Flange B10)
POG 9 – HeavyDuty Incremental Encoder (Solid Shaft)
SSD Range – Explosion Proof Enclosures & Junction Boxes
TLP-V60 / TLP-V100 – Budget Plug-in Surge Protectors (60kA / 100kA)
TLP-SF32 – 3 Phase Series Filter Surge Protector (32A)
TLP-SP20SL – Single Phase Slimline Surge Protector
TLP-CPH-3P-R - 3-phase compact hybrid surge protector
Crack Meter | EDJ40C
MAGNA large digit display
-280x280-state_7.jpg)
M208 IEPE signal conditioner
WSPF Signal converter
WPMZ Panel Meters
TIM 8 Spot Finder Pyrometers
Miniature Draw Wire Sensor MT Series
Elastisense Displacement Sensor Series
-280x280-state_7.jpg)
ILR2250 - Industrial Long Range Laser Sensor
-280x280-state_7.jpg)
optoNCDT 1900 - High speed non-contact laser displacement sensor
CTP Rotate - High speed wireless telemetry
Laser Profile Scanners for 2D / 3D measurements
Imc CANSAS | Data Acquisition System with high precision amplifiers
CNC Training Virtual Machine | RenAn | Training Simulator
3D Virtual Reality Welder Training Simulator. MODEL ARC+
Mining Simulators | Customer Support Programs | CSP
Surface Mining Simulators: Haul Trucks, Shovels, Excavators, Dozers...
Underground Mining Simulators: Drill Rigs, Bolters, LHDs, ADTs, etc
Upgradable Air Conditioning Laboratory Unit for Industrial Training - By Bestech Australia
Hydraulic Training System | MF102-H
Tower Crane Personal Simulator
Hydraulic Training Systems
Electronics Training System | PES
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales