It is also suitable for aeration in oxidation ditches, SBRs, equalization basins and aerobic digesters.
For Lagoon application operation
The mixing profile of the Floating Brush Aerator moves the wastewater in a horizontal pattern, which prevents short-circuiting from occurring.
The horizontal mixing circulates highly oxygenated water across the top of a lagoon, significantly reducing the BOD and creating an oxygen cap across the lagoon to reduce odours.
It utilize an anaerobic sludge digestion process.
Key features of ECS House Floating Brush Aerators
Standard Aeration Efficiency (SAE) of 1.8 kgO2/kWh
High mixing efficiency from 17.8 m3/min per kW
Use of stainless steel grease lubricated drive end and non-drive end bearings with L10 Life of >100,000 hours (compared to UHMW plastic water lubricated bearings used by some other manufacturers)
Motor TEFC, 415V, 3-ph, 50 Hz, with IP55 protection (IP56 available as OPTION)
Drive end and Non-drive end shafts in 316 stainless steel
Very low maintenance, simple lubrication every 4 months
ECS House is the only manufacturer of this type of aerator to utilize a triple seal protection system to completely seal the gear drive enclosure. This eliminates the risk of wastewater coming into contact with the key drive components thus providing complete corrosion protection.
Several options for materials of construction are available
MAK Water | Wastewater and Sewage Treatment Solutions
MAK Water is a privately owned Australian company providing water, wastewater and sewage treatment solutions to industries in Australia and overseas. Founded in 2003 as a water treatment reliability ...