Case and assembly
MC308 converter is available in three different enclosures. ABS enclosure with protection degree IP 67; cast aluminium enclosure with protection degree IP 67; die cast aluminium cylindrical enclosure with protection degree IP 68.
MC 308 converters can be mounted both in the compact and separate version. The aluminum case, in the compact mounting, is equipped with a special bracket that allows the converter to remain vertical whatever the position of the sensor might be (vertical or horizontal).
Cylindrical aluminium enclosure may be rotated by 90° around the junction box axis without opening it.
In the separate version, MC308 converters are connected to the sensors by means of a pair of cables, whose maximum length depends on the liquid conductivity
Coupling with sensors
MC308 converters may be coupled with any EUROMAG sensor whose coefficients KA and KB are established during calibration and marked on the sensor plate at the factory.
The coupling is done by entering in the converter, via the keyboard, these two coefficients. Generally, this operation takes place in the factory, but it can also be done at site.