Encore Monitoring Gas Monitor | Series ...

Encore Monitoring - Gas Monitor | Series 3000 MKII & MKIII

Supplier: Encore Monitoring

Gas Monitor | Series 3000 MKII & MKIII

The Series 3000 MkII provides comprehensive monitoring of toxic and Oxygen gas hazards in potentially explosive atmospheres, both in and out of doors.

In Stock

Product features:

Proven electrochemical sensing technology
Flame-proof housing
Suitable for indoor/outdoor applications
Two-wire 4-20mA loop powered
Non-intrusive configuration

Specifications:

Use	Rugged and reliable gas detector for the protection of personnel from toxic and oxygen gas hazards. Suitable for use in Zone 1 or 2 hazardous areas and North American Class I and II Division 1 or 2 areas.
Connections and Power	2-wire loop powered; 17Vdc (+/-10%) to 24Vdc (max) operation; 22mA max. over range
Recommended Cable	2-wire with shield (90% coverage) or conduit; 0.5mm2 (20AWG) to 2.0mm2 (14AWG)
Singal	0-100%FSD 4-20mA; Fault = 3mA; Calibration due selectable off or 3mA Max. over range 22mA; Inhibit (toxic sensors) = Selectable 3mA or 4mA Inhibit; (Oxygen sensors) = Selectable 3mA or 17.4mA
Material	Transmitter: Epoxy painted aluminum alloy LM25 or 316 stainless steel Sensor: 316 stainless steel with PTFE filter
Maximum Dimensions	164 x 201 x 99mm
Weight	Aluminum alloy: 3.75 lbs./1.79 kg
IP Rating	IP66 (EN60529), NEMA 4X
Operating Humidity	Continuous 20-90% RH (non-condensing); Intermittent 0-99% RH (non-condensing)
Operating Pressure	90-110kPa
Storage Conditions	15°C to 30°C 30-70%RH (non-condensing)

To contact Encore Monitoring about Encore Monitoring Gas Monitor | Series 3000 MKII & MKIII use Get a quote.

Product features:

Proven electrochemical sensing technology
Flame-proof housing
Suitable for indoor/outdoor applications
Two-wire 4-20mA loop powered
Non-intrusive configuration

Specifications:

Use	Rugged and reliable gas detector for the protection of personnel from toxic and oxygen gas hazards. Suitable for use in Zone 1 or 2 hazardous areas and North American Class I and II Division 1 or 2 areas.
Connections and Power	2-wire loop powered; 17Vdc (+/-10%) to 24Vdc (max) operation; 22mA max. over range
Recommended Cable	2-wire with shield (90% coverage) or conduit; 0.5mm2 (20AWG) to 2.0mm2 (14AWG)
Singal	0-100%FSD 4-20mA; Fault = 3mA; Calibration due selectable off or 3mA Max. over range 22mA; Inhibit (toxic sensors) = Selectable 3mA or 4mA Inhibit; (Oxygen sensors) = Selectable 3mA or 17.4mA
Material	Transmitter: Epoxy painted aluminum alloy LM25 or 316 stainless steel Sensor: 316 stainless steel with PTFE filter
Maximum Dimensions	164 x 201 x 99mm
Weight	Aluminum alloy: 3.75 lbs./1.79 kg
IP Rating	IP66 (EN60529), NEMA 4X
Operating Humidity	Continuous 20-90% RH (non-condensing); Intermittent 0-99% RH (non-condensing)
Operating Pressure	90-110kPa
Storage Conditions	15°C to 30°C 30-70%RH (non-condensing)

Read less...

To contact Encore Monitoring about Encore Monitoring Gas Monitor | Series 3000 MKII & MKIII use Get a quote.

AI Overview BETA

Encore Monitoring’s Series 3000 MKII and MKIII are gas monitors for toxic and oxygen gas hazards in potentially explosive atmospheres. Electrochemical sensing technology monitors these gases and helps protect site personnel from exposure to toxic and oxygen gas hazards. For indoor and outdoor sites, the two-wire loop-powered monitor supports installation with shielded cable or conduit.