Habermann Industrial Sludge Pumps | NPW ...

Habermann - Industrial Sludge Pumps | NPW Series

Supplier: Longwall Hydraulics

Industrial Sludge Pumps | NPW Series

1/2

Ideal for industrial slurry handling. The main areas of application for the metallic centrifugal pumps of the NPW series are applications with light to medium wear.

In Stock

Features of this product

Ideal for industrial slurry handling. The main areas of application for the metallic centrifugal pumps of the NPW series are applications with light to medium wear. By using selected material qualities, this type can also be used with slightly corrosive/abrasive media.
This series is a single-stage centrifugal pump made of high-strength cast steel with easily replaceable wear parts and the option of adjusting the suction gap.
Impeller, wear plates and housing are dimensioned according to the requirements and optimized to achieve the best possible service life. Even under the toughest operating conditions, the NPW series achieves the lowest life cycle costs.
The single-stage centrifugal pump series NPW has wear parts that are easy to replace. The wear plates and the housing are braced via the two housing covers by means of tie rods.
The NPW pump series is a cost-effective pump for conveying slightly abrasive media and is used as:
- Drainage pump in quarries
- Feed pump in tunnel construction
- Mixer pump in the ready-mixed concrete industry
Material qualities optimized for your application for low life cycle costs
Inexpensive pump variant for tough applications

Specifications of this product

FLOW RATE: up to 4,600 m3 / h
DELIVERY HEAD, SINGLE-STAGE: UP TO 70 M.FI.S
PUMP SPEED: UP TO 2,950 RPM
CONNECTION SIZES: DN40 - DN450
MAXIMUM OPERATING PRESSURE: 6 BAR
TEMPERATURE OF THE LIQUID: 90°C
DISCHARGE NOZZLE POSITION: GRADUALLY
CORROSION RESISTANCE AT PH: 3 - 14

To contact Longwall Hydraulics about Habermann Industrial Sludge Pumps | NPW Series use Get a quote.

Features of this product

Ideal for industrial slurry handling. The main areas of application for the metallic centrifugal pumps of the NPW series are applications with light to medium wear. By using selected material qualities, this type can also be used with slightly corrosive/abrasive media.
This series is a single-stage centrifugal pump made of high-strength cast steel with easily replaceable wear parts and the option of adjusting the suction gap.
Impeller, wear plates and housing are dimensioned according to the requirements and optimized to achieve the best possible service life. Even under the toughest operating conditions, the NPW series achieves the lowest life cycle costs.
The single-stage centrifugal pump series NPW has wear parts that are easy to replace. The wear plates and the housing are braced via the two housing covers by means of tie rods.
The NPW pump series is a cost-effective pump for conveying slightly abrasive media and is used as:
- Drainage pump in quarries
- Feed pump in tunnel construction
- Mixer pump in the ready-mixed concrete industry
Material qualities optimized for your application for low life cycle costs
Inexpensive pump variant for tough applications

Specifications of this product

FLOW RATE: up to 4,600 m3 / h
DELIVERY HEAD, SINGLE-STAGE: UP TO 70 M.FI.S
PUMP SPEED: UP TO 2,950 RPM
CONNECTION SIZES: DN40 - DN450
MAXIMUM OPERATING PRESSURE: 6 BAR
TEMPERATURE OF THE LIQUID: 90°C
DISCHARGE NOZZLE POSITION: GRADUALLY
CORROSION RESISTANCE AT PH: 3 - 14

Read less...

To contact Longwall Hydraulics about Habermann Industrial Sludge Pumps | NPW Series use Get a quote.

habermann-slurry-pumps brochure(9.68MB)

AI Overview BETA

Habermann NPW Series pumps are single-stage centrifugal pumps made from high-strength cast steel for moving industrial slurry and slightly abrasive media. The pump’s easily replaced wear parts include wear plates and housing; tie rods brace them between the two housing covers. Quarry operators can use them as drainage pumps in applications involving light to medium wear.