HMPS - Vibratory Equipment

Read more...

To contact HMPS about HMPS Vibratory Equipment use Get a quote.

Range and construction

• Designed and manufactured in Australia for steady, controlled product flow from bulk through to packing, with robust engineering.
• Feeders precisely meter product horizontally over short distances; conveyors move it further, elevate it or provide a buffer.
• Every unit is sized against product bulk density, particle size and target rate in kilograms per hour.
• Built to HACCP and Australian food and pharmaceutical industry hygiene standards. Product contact surfaces and supports are stainless steel, with bead-blasted external and polished internal finishes.
• Feed equipment integrates with the packing machine on one control platform. Standard variable speed control follows demand and allows recipe-based feed-rate changes.

Electromagnetic equipment

• Direct tray vibration with no rotating drive parts provides near-instant start and stop, fine control at low feed rates, low energy consumption and minimal maintenance.
• Controllers maintain accurate frequency bands for high-speed filling and pinpoint dosing. Suitable for on-demand feeding into multihead weighers, depositors and filling heads, including fragile products that chip, crack or break.
• Common duties include chocolate and confectionery, nuts, biscuits, pasta, milk powder and pet food.
• Trays: rectangular for general feeding; bias discharge for angled discharge; conical for centring into a chute; fines removal for separating small particles; tubular for enclosed handling.
• Hopper Feeder: combines bulk storage and metered discharge. Sized to the required refill interval, with low-level warning and non-standard capacities built to order.
• Drives: Australian-manufactured electromagnetic units compliant with food and pharmaceutical industry standards. The LD series covers most duties, sized to tray and load.
• Controllers: certified, compliant standard and multi-function models, with variable speed and integration into packing-machine controls.

Electromechanical equipment

• Twin counter-rotating vibratory motors combine forces into linear feed for larger volumes and denser, more abrasive products, including mining, quarrying, chemicals and fertilisers.
• Base-mounted or suspended units, typically stainless steel, with electronic speed adjustment as standard.
• Duty-selected isolation uses coil springs, rubber isolators, air bags or torsion mounts. Elevated installations require braced supporting steel.
• Motor Feeder: high head load capacity maintains feed control beneath a full hopper; base-mounted or suspended.
• Hopper Feeder: adjustable gating, level indicators, de-dusting, screening sections and bag support for manual tipping. Optional lock-down wheels allow movement between lines. Applications include frozen product, confectionery and dried fruit.
• Motor Screener: linear de-lumping, sizing and fines removal; stainless steel with selectable surface finishes, flat or contoured beds and quick-release covers for cleaning and screen changes.
• Tube Conveyor: fully enclosed, floor-mounted or suspended conveying contains dust and product. Handles highly abrasive material, bulk food, chemicals and fertilisers without belt wear; the tube rotates to change the material contact path as it wears.
• Reversing Feeder: feeds in two directions as an alternative to screw or belt conveyors. Enclosed against dust and cross-contamination, with an open-trough underside for cleaning and HACCP-compliant stainless construction. Used at filling stations and ahead of multihead weighers.
• Spiral Elevating Conveyor: vibratory-motor-driven spiral lifts product within a column footprint where an incline conveyor will not fit. Stainless steel, base or overhead drive, with electronic-control integration.
• Vibratory Compaction Table: settles and shapes filled bags for maximum net pack volume, improved shelf presentation, more bags per pallet and lower transport cost per tonne. Stainless steel with an operator-protection safety clutch.

Conveyors and packing equipment

• Belt and vibratory conveyors share the range’s hygiene standard, with FDA-approved belting and running gear. Stainless control enclosures include stop-start, E-stop and belt interlocks.
• Accumulation Conveyor: buffers product and meters it slowly into the next operation, avoiding double handling and separating upstream and downstream processes during short stoppages.
• Mi-CON Modular Incline Conveyor: cleated belting and sidewall guides elevate product from floor level to a multihead weigher or filler without spilling. Standardised modules support quick assembly, installation and reconfiguration; FDA-approved components throughout.
• A hopper feeder and Mi-CON conveyor can feed a multihead weigher, with level sensing pausing feed when the weigher is full.
• Takeaway Conveyor: controlled removal of finished packs from a bagger or filler; full stainless construction, low profile beneath the discharge and belt material selected for the pack.
• Bag Flattener Conveyor: controlled vibration and pressure flatten bags, reducing film per pack, improving case stacking and providing a consistent checkweigher profile for improved weight accuracy.
• Bag Conditioning Conveyor: settles misshapen bags from vertical filling machines into square, consistent packs for improved shelf presentation and more packs per pallet.
• Rotary Packing Table: collects finished packs in a rotating pool for operator-paced packing. Stainless steel, fixed or variable speed, with an operator-protection safety clutch.

Read less...

To contact HMPS about HMPS Vibratory Equipment use Get a quote.