HMPS Cobot Palletisers

HMPS - Cobot Palletisers

Supplier: HMPS

Cobot Palletisers

1/5

HMPS Cobot Palletisers offer fixed or mobile palletising for standard Australian pallets, with built-in force and speed limiting and fence-free operation subject to risk assessment.

Fence-free, mobile

Receive 2-4 weeks from order

Features

Collaborative robot with built-in force and speed limiting for lower-throughput lines, constrained floor space and height-restricted sites.
Fixed or mobile cells. Mobile plinths dock to mechanical datum stations, each with its own safety zone, allowing one machine to serve several lines in rotation.
Fence-free operation subject to an application-specific risk assessment. Floor laser scanners provide speed and separation monitoring, allowing faster operation when the zone is clear. The robot’s mechanical maximum is not achievable collaboratively.
Australian made, with robust engineering, on-site support and 24/7 remote support.

Specifications

Specification	Standard
Typical output	Up to 4–6 cycles/min in collaborative mode; up to 8 cycles/min with floor safety scanners
Payload / reach	25 kg including tooling · 1,902 mm reach · ±0.05 mm repeatability · 6 rotating joints
Pallet	Standard 1,165 mm Australian pallet, single or dual stations, up to 1,400 mm finished height with the pallet on the floor
Picks	One carton per pick; carton weights up to 15 kg documented
Carton presentation	Base down, short end leading, datumed by adjustable side guide and fixed end stop
Cell contents	Cobot, vacuum gripper, plinth on castors with lowerable feet, two pallet locations with sensors, PLC and HMI, floor safety scanners, pallet-build software, driven roller conveyor, docking stations
Not included	Slip sheets and layer sheets, carton open-flap detection, pallet pattern design beyond the one proved at FAT
Robot environment	IP54, 0–50°C, =85% RH non-condensing
Controls	PLC and HMI in cabinet; robot comms via Ethernet, Modbus TCP/RTU, with PROFINET and EtherNet/IP optional
Power / air	415V AC 3-phase 50Hz, 20A per system (robot 110–240 VAC, typically 500 W) · 6 bar, 350 L/min
Safety & standards	Category 3 minimum, Category 4 compressed air · AS4024 · AS3000 · HMPS risk assessment · 250 mm/s collaborative speed limit, 150 N external force limit
Install / lead time	Running in as little as 1 business day on site · 18–20 weeks from order

All stats are subject to product and environment and may differ from those listed.

Applications and scope

Shipper cartons and RSC cases, including cases from case packers and manual pack stations.
Inner and shelf-ready cartons.
Mobile multi-line palletising and tight-space installations where a guarded cell cannot fit or individual lines cannot justify a fenced cell.
Slip sheets, layer pads and empty-pallet handling are outside the cobot cell scope.
A full robot cell is recommended above roughly 8 cycles per minute, for multiple cartons per pick, pallets exceeding 1,400 mm, heavy bags, cartons above 15 kg, or one robot serving several infeeds and pallet stations.

Features

Collaborative robot with built-in force and speed limiting for lower-throughput lines, constrained floor space and height-restricted sites.
Fixed or mobile cells. Mobile plinths dock to mechanical datum stations, each with its own safety zone, allowing one machine to serve several lines in rotation.
Fence-free operation subject to an application-specific risk assessment. Floor laser scanners provide speed and separation monitoring, allowing faster operation when the zone is clear. The robot’s mechanical maximum is not achievable collaboratively.
Australian made, with robust engineering, on-site support and 24/7 remote support.

Specifications

Specification	Standard
Typical output	Up to 4–6 cycles/min in collaborative mode; up to 8 cycles/min with floor safety scanners
Payload / reach	25 kg including tooling · 1,902 mm reach · ±0.05 mm repeatability · 6 rotating joints
Pallet	Standard 1,165 mm Australian pallet, single or dual stations, up to 1,400 mm finished height with the pallet on the floor
Picks	One carton per pick; carton weights up to 15 kg documented
Carton presentation	Base down, short end leading, datumed by adjustable side guide and fixed end stop
Cell contents	Cobot, vacuum gripper, plinth on castors with lowerable feet, two pallet locations with sensors, PLC and HMI, floor safety scanners, pallet-build software, driven roller conveyor, docking stations
Not included	Slip sheets and layer sheets, carton open-flap detection, pallet pattern design beyond the one proved at FAT
Robot environment	IP54, 0–50°C, =85% RH non-condensing
Controls	PLC and HMI in cabinet; robot comms via Ethernet, Modbus TCP/RTU, with PROFINET and EtherNet/IP optional
Power / air	415V AC 3-phase 50Hz, 20A per system (robot 110–240 VAC, typically 500 W) · 6 bar, 350 L/min
Safety & standards	Category 3 minimum, Category 4 compressed air · AS4024 · AS3000 · HMPS risk assessment · 250 mm/s collaborative speed limit, 150 N external force limit
Install / lead time	Running in as little as 1 business day on site · 18–20 weeks from order

All stats are subject to product and environment and may differ from those listed.

Applications and scope

Shipper cartons and RSC cases, including cases from case packers and manual pack stations.
Inner and shelf-ready cartons.
Mobile multi-line palletising and tight-space installations where a guarded cell cannot fit or individual lines cannot justify a fenced cell.
Slip sheets, layer pads and empty-pallet handling are outside the cobot cell scope.
A full robot cell is recommended above roughly 8 cycles per minute, for multiple cartons per pick, pallets exceeding 1,400 mm, heavy bags, cartons above 15 kg, or one robot serving several infeeds and pallet stations.

Read less...

To contact HMPS about HMPS Cobot Palletisers use Get a quote.

Let HMPS provide you with a quote

Supplier

Supplier: HMPS

Distribution: Australia & New Zealand

Location: ADELAIDE AIRPORT, SA

Customers: Asahi, Bega, BWX, Mondelez, Ingham, McCain, Mars, Linfox, Unilever, Coles, Fonterra, Heinz

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. HMPS are also proudly displaying these credentials:

Established:

1980

Employees:

51-200

Customers:

Asahi, Bega, BWX, Mondelez, Ingham, McCain, Mars, Linfox, Unilever, Coles, Fonterra, Heinz

Distribution:

Australia & New Zealand

Location:

ADELAIDE AIRPORT , SA

Joined:

Nov 2026