HMPS Wrap-Around Case Packers

HMPS - Wrap-Around Case Packers

Supplier: HMPS

Wrap-Around Case Packers

1/5

HMPS Wrap-Around Case Packers form tight, square, shelf-ready cases from a single flat blank, with output up to 30 cases per minute and tool-less changeover.

Tight, square and shelf-ready

Features

Draws a flat blank from the magazine, positions it under collated product and wraps it through index stations, then hot-melt glues it under four-side compression while the adhesive sets.
No manufacturer’s joint; tight wrapping uses less board, increases column strength and improves pallet stacking efficiency.
Square front flap and no visible tape for shelf-ready packaging. Designs are accepted by major Australian retailers; the erect-fold-seal sequence protects perforations.
Four collation methods accommodate flexible and rigid packs. Delta-arm robotic loading provides consistent depth-wise compression for flexible packs.
Tool-less, colour-coded change parts; no part exceeds 2 kg and changeover requires no climbing inside the machine.
Purpose-built machines, with size range determining design and changeover method.
Robust engineering; Australian made.

Specifications

Specification	Standard
Typical output	Up to 30 cases/min
Case size range	Around 100 × 60 × 60 mm minimum to 1,000 × 600 × 500 mm maximum
Board	E, B and C flute including recycled content, to AS3537
Collation	Mechanical stack-down, servo index and sideways push, delta arm robot, XY or T-gantry
Sealing	Hot melt only — Nordson standard, Robatech available, tank to 180°C
Magazine	400 blanks standard, extendable
Changeover	Tool-less and colour-coded, under 20 minutes single operator; around 10 minutes with a high proportion of automated adjustment points
Construction	Heavy-wall stainless RHS fully welded torsional frame, 304 stainless, aluminium and engineering plastics, IP65 wipe-down
Lubrication	None continuous — UHMWPE chain tracks run dry, bearings sealed for life
Controls	Allen Bradley CompactLogix (ControlLogix with delta robot), PanelView Plus, PowerFlex 525, Kinetix servos, SEW Eurodrive, IFM sensors
Power / air	415V AC 3-phase 50Hz + N + E, 32A · 6 bar, 350 L/min clean dry air
Safety & standards	Category 3 standard, Category 4 available · AS4024.1 guarding · AS3000 wiring · AS/NZS 60204.1

Specifications depend on product and environment. Output depends on case size and product count; large cases with high bottle counts run below maximum output.

Board comparison and blank requirements

HMPS engineering comparison: 244 × 204 × 94 mm internal case; wrap-around blank 0.2086 m² versus RSC 0.2665 m² — 21.7% reduction, or around 22% less blank area. Eliminates the corrugator’s manufacturer’s-joint gluing charge.
Blank design rules: constant minor flap width, constant manufacturer’s flap width, 2mm product clearance and a varnish-free glue area.

Applications

Pouches, doypacks, stand-up cookie and snack bags, sachets and pet food.
Sleeved or unsleeved dip and dairy tubs; ice cream tubs; multipack cartons; ready meal, PP and retail-ready trays.
Cans, bottles, gable-top and tetra milk cartons; beverage and dairy multipacks.
Cheese blocks, bag-in-box cartons, crackers and biscuits.

Features

Draws a flat blank from the magazine, positions it under collated product and wraps it through index stations, then hot-melt glues it under four-side compression while the adhesive sets.
No manufacturer’s joint; tight wrapping uses less board, increases column strength and improves pallet stacking efficiency.
Square front flap and no visible tape for shelf-ready packaging. Designs are accepted by major Australian retailers; the erect-fold-seal sequence protects perforations.
Four collation methods accommodate flexible and rigid packs. Delta-arm robotic loading provides consistent depth-wise compression for flexible packs.
Tool-less, colour-coded change parts; no part exceeds 2 kg and changeover requires no climbing inside the machine.
Purpose-built machines, with size range determining design and changeover method.
Robust engineering; Australian made.

Specifications

Specification	Standard
Typical output	Up to 30 cases/min
Case size range	Around 100 × 60 × 60 mm minimum to 1,000 × 600 × 500 mm maximum
Board	E, B and C flute including recycled content, to AS3537
Collation	Mechanical stack-down, servo index and sideways push, delta arm robot, XY or T-gantry
Sealing	Hot melt only — Nordson standard, Robatech available, tank to 180°C
Magazine	400 blanks standard, extendable
Changeover	Tool-less and colour-coded, under 20 minutes single operator; around 10 minutes with a high proportion of automated adjustment points
Construction	Heavy-wall stainless RHS fully welded torsional frame, 304 stainless, aluminium and engineering plastics, IP65 wipe-down
Lubrication	None continuous — UHMWPE chain tracks run dry, bearings sealed for life
Controls	Allen Bradley CompactLogix (ControlLogix with delta robot), PanelView Plus, PowerFlex 525, Kinetix servos, SEW Eurodrive, IFM sensors
Power / air	415V AC 3-phase 50Hz + N + E, 32A · 6 bar, 350 L/min clean dry air
Safety & standards	Category 3 standard, Category 4 available · AS4024.1 guarding · AS3000 wiring · AS/NZS 60204.1

Specifications depend on product and environment. Output depends on case size and product count; large cases with high bottle counts run below maximum output.

Board comparison and blank requirements

HMPS engineering comparison: 244 × 204 × 94 mm internal case; wrap-around blank 0.2086 m² versus RSC 0.2665 m² — 21.7% reduction, or around 22% less blank area. Eliminates the corrugator’s manufacturer’s-joint gluing charge.
Blank design rules: constant minor flap width, constant manufacturer’s flap width, 2mm product clearance and a varnish-free glue area.

Applications

Pouches, doypacks, stand-up cookie and snack bags, sachets and pet food.
Sleeved or unsleeved dip and dairy tubs; ice cream tubs; multipack cartons; ready meal, PP and retail-ready trays.
Cans, bottles, gable-top and tetra milk cartons; beverage and dairy multipacks.
Cheese blocks, bag-in-box cartons, crackers and biscuits.

Read less...

To contact HMPS about HMPS Wrap-Around Case Packers use Get a quote.

Let HMPS provide you with a quote

Supplier

Supplier: HMPS

Distribution: Australia & New Zealand

Location: ADELAIDE AIRPORT, SA

Customers: Asahi, Bega, BWX, Mondelez, Ingham, McCain, Mars, Linfox, Unilever, Coles, Fonterra, Heinz

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. HMPS are also proudly displaying these credentials:

Established:

1980

Employees:

51-200

Customers:

Asahi, Bega, BWX, Mondelez, Ingham, McCain, Mars, Linfox, Unilever, Coles, Fonterra, Heinz

Distribution:

Australia & New Zealand

Location:

ADELAIDE AIRPORT , SA

Joined:

Nov 2026