Industrial Ultrasonic Spray Coater MAX for sale from ProfTek Pty Ltd

Industrial Ultrasonic Spray Coater MAX

Supplier: ProfTek Pty Ltd

Industrial Ultrasonic Spray Coater MAX

The Industrial Ultrasonic Spray Coater MAX provides large-area thin-film deposition, with dual vacuum heating platforms, 24-hour continuous production and up to four times higher transfer efficiency than air spraying.

Overview

High-capacity coating system for large-area and continuous thin-film deposition in industrial manufacturing and research.
Ultrasonic atomisation produces finely controlled droplets for highly uniform coatings with minimal overspray, reducing raw-material waste and improving cost-effectiveness.
Configurable and programmable, scaling from small-batch laboratory operations to high-volume continuous production.

Specifications

Specification	Value
Maximum coating area per platform	650 × 600 mm
Material viscosities	up to 20–30 cps
Particle sizes	up to 10–20 µm
Coating thickness	20 nm to 100 µm
Digital ultrasonic generator accuracy	0.01 W
Uniformity	greater than 95 %
Continuous production	24-hour
Transfer efficiency compared with traditional air-spray coating	up to four times higher

Coating thickness depends on process parameters and material properties.

Features

Multiple WideMist ultrasonic nozzles can operate in parallel to increase throughput, atomising liquid through ultrasonic vibration rather than high-pressure air.
Dual automatic vacuum heating platforms enable alternating coating and loading.
Precision metering-pump system supplies liquid stably and consistently.
Built-in carrier-gas and air-pressure control, heating plates and exhaust system maintain a clean, controlled coating environment.
High-precision XYZ servo-motion system and digital ultrasonic generator provide smooth, repeatable coating paths.
Intuitive full-colour touchscreen interface simplifies operation.
Optional ultrasonic dispersion unit maintains suspension homogeneity during spraying.
Robust mechanical and electrical construction supports extended service life and reliable continuous production.
Programmable process parameters with recipe storage.
Comprehensive safety interlocks and alarm functions.
Standard data output interfaces support process monitoring, statistical reporting and traceability.
Service access minimises planned maintenance downtime and enables rapid fault diagnosis.
Supported by Prof-Tek’s comprehensive Australian warranty and aftersales service program.

Applications

Fuel-cell membranes (CCM).
Solar-cell functional layers.
Biosensors and microfluidic chips.
Photoresist and optical coatings.
Hydrophobic, hydrophilic, and anti-reflection coatings.
Thermal-insulation and transparent-conductive films.
Electronics manufacturing, semiconductor processing, precision industrial production, scientific research and development, and specialised manufacturing processes.

Overview

High-capacity coating system for large-area and continuous thin-film deposition in industrial manufacturing and research.
Ultrasonic atomisation produces finely controlled droplets for highly uniform coatings with minimal overspray, reducing raw-material waste and improving cost-effectiveness.
Configurable and programmable, scaling from small-batch laboratory operations to high-volume continuous production.

Specifications

Specification	Value
Maximum coating area per platform	650 × 600 mm
Material viscosities	up to 20–30 cps
Particle sizes	up to 10–20 µm
Coating thickness	20 nm to 100 µm
Digital ultrasonic generator accuracy	0.01 W
Uniformity	greater than 95 %
Continuous production	24-hour
Transfer efficiency compared with traditional air-spray coating	up to four times higher

Coating thickness depends on process parameters and material properties.

Features

Multiple WideMist ultrasonic nozzles can operate in parallel to increase throughput, atomising liquid through ultrasonic vibration rather than high-pressure air.
Dual automatic vacuum heating platforms enable alternating coating and loading.
Precision metering-pump system supplies liquid stably and consistently.
Built-in carrier-gas and air-pressure control, heating plates and exhaust system maintain a clean, controlled coating environment.
High-precision XYZ servo-motion system and digital ultrasonic generator provide smooth, repeatable coating paths.
Intuitive full-colour touchscreen interface simplifies operation.
Optional ultrasonic dispersion unit maintains suspension homogeneity during spraying.
Robust mechanical and electrical construction supports extended service life and reliable continuous production.
Programmable process parameters with recipe storage.
Comprehensive safety interlocks and alarm functions.
Standard data output interfaces support process monitoring, statistical reporting and traceability.
Service access minimises planned maintenance downtime and enables rapid fault diagnosis.
Supported by Prof-Tek’s comprehensive Australian warranty and aftersales service program.

Applications

Fuel-cell membranes (CCM).
Solar-cell functional layers.
Biosensors and microfluidic chips.
Photoresist and optical coatings.
Hydrophobic, hydrophilic, and anti-reflection coatings.
Thermal-insulation and transparent-conductive films.
Electronics manufacturing, semiconductor processing, precision industrial production, scientific research and development, and specialised manufacturing processes.

Read less...

To contact ProfTek Pty Ltd about Industrial Ultrasonic Spray Coater MAX use Get a quote.

Let ProfTek Pty Ltd provide you with a quote

Supplier

Supplier: ProfTek Pty Ltd

Location: Pagewood, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. ProfTek Pty Ltd are also proudly displaying these credentials:

Location:

Pagewood , NSW

Joined:

Oct 2026

Level:

Premium Storefront

Verified: