The IAI weatherproof is a universally powered (85-265VAC) or 10-40VDC powered injection controller for liquids featuring a 64 x 128 Mono Graphics LCD display, a M3 32 bit ARM processor and quadrature pulse input for main and additive flow.
The IAI Controller combines with an additive injection manifold to provide a compact additive injection system. The system is configured by push buttons on the instrument face, a four-button infrared remote control or RS485 communication from a host.
Simple touch switch set up with English statement prompts by approved IR remote
Low cost - High performance
Programmable dual channel quadrature input or single pulse train with DIP switch selection for turbine, reed switch & open collector
Background total for main flow and additive flow
Dual 4-20mA output with Proportional and Integral algorithm control from the main and additive flow signal for modulating valve control for continuous dispensing of additive
Main flow and additive flow rate display
Sensor supply that can be adjusted from 8 to 20VDC
Micro SD card for 8GB for storage of batching data
85 to 265VAC 47-63 Hz universal supply or factory fitted 10 to 40VDC isolated supply
The IAI accepts a dual channel input from 0 to 2KHZ and is DIP switch selectable for open collector, reed, Hall and turbine signals (from 20mV peak to peak)
External squirt button included on EXD housing
Injector block size 4 [.01 to 1.0 LPM] selection size by application
Injector block size 6 [.03 to 1.66 LPM] selection size by application
Injector block size 8 [.25 to 10.0 LPM] selection size by application
Controller accuracy +/- 0.5% with a repeatability of +/- 0.25%
The IAI incorporates a 64x128 dot graphics module with RGB backlight in English
Four button IR remote is potted in epoxy and complies with AS/NZS 60079.18: 2005
-20 to 50°C
Protection class to IP66
Approvals IECEX (enclosure)
4 of voltage free inputs 24VDC tolerant
6 of open collector outputs 24VDC tolerant @ 200mAmpere
1 of timed open collector output 24VDC tolerant @ 200mAmpere
4 of relay outputs 240VAC tolerant SSR @ 2Ampere with external snubber or
Communications: Isolated 2 wire RS485 with Modbus RTU protocol
85 to 265VAC 47-63 Hz or DC to DC converter isolator from 10 to 40VDC. An adjustable transducer power supply of 8 to 20VDC at 30mA is incorporated.
Surface mounting IP66 plastic enclosure of case dimensions 200mm wide x 200mm high x 95mm deep with fixing centres of 182mm wide x182mm high by M4 screws.
6 of M20 cable entries available for user connection
Weight is 2kg
Model Structure: model/input/display/power supply/options
Sample Number: IAIP/2xB/0-99999999/VAC
Innovec Controls | Process Instrumentation
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel ...