Ofmer - Rebar Bender Evo Series

Read more...

To contact Delahenty Machinery about Ofmer Rebar Bender Evo Series use Get a quote.

REBAR BENDING MACHINES

Delahenty Machinery offer a wide range of OF.ME.R. machines to bend concrete reinforcing steel rods.

Performant, safe and intuitive products, appreciated worldwide for their excellent quality-price ratio and for the accurate sales and after-sales service provided by the Manufacturer.

On a construction site it’s essential to give continuity to the work, especially if there are deadlines to be met. For this reason, every OF.ME.R. bending machine is structured with features that make it able to face important working rates.

The self-breaking motors, installed on all bending machines and strictly made in Italy, are designed to optimise and enhance the processing capacity of each machine, such as the electrical components, of the best available brands.

The desire to differentiate ourselves in an increasingly demanding and competitive market, led OF.ME.R. to project and launch the line Evo: a new series of bending machines for concrete reinforcing steel rods, the result of the latest building technologies applied to the experience achieved over the years.

The reduction gearbox is a monobloc in spheroidal cast iron, with the same resistance of iron, does not have any welding and this gives the product considerable strength and sealing.

These models are standardly produced with a wide turning plate, that permits to obtain larger curving radii compared to the Standard version, and with long saddles, that allow to perform the “double bending”.

Formidable machines, with high-performance and easy to maintain, on which the manufacturer believes strongly and grants 2 year warranty on all mechanical components.

Standard Equipment:
- A checking block, indispensable to correctly direct the rod on the working top and loosen the effort exerted on the bar in the previous point to the bending point, thus avoiding possible deformations of the rod. Can be used with bars up to Ø 20mm;
- A square pin, to be used with the checking block, to counteract and annul the effort exercised by the bending on the checking block;
- A stirrup bending pin in special cemented and hardened steel, to be positioned on the turning plate for the production of stirrups, as it permits to obtain small curving radii. Can be used with bars up to Ø12mm;
- Three bush holding pins in special hardened and cemented steel, to be positioned on the working top together with bushes, with the function to support the effort coming from the phase of bending;
- A set of bushes, studied in detail for each rebar bending machines model. The width of the bush positioned on the central hole of the plate corresponds to the bending radius. To use bars from Ø15mm on, it’s important that the diameter of the bush is at least 3 times bigger compared to the diameter of the rod to be bent. Bushes are also used as a thickness for the bending bush holding pin, in case the alignment of the bar is ineffective. In this way, the rod is blocked, but the rotation of the bush on the pin allows the sliding of the bar during the bend, avoiding possible rubbings;
- Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending;
- A set of Allen keys, for ordinary maintenance;
- An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine;
- A set of wheels, for the machine handling;
- An industrial plug, that guarantees the electrical connection;
- Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;
- Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending.

In Stock with Angle Control:

The Angle Control is an advanced electronic programmer. Built with cutting-edge techniques and circuits, and in compliance with operator safety standards, this panel allows the storage of up to 10 bending angles in any sequence, ensuring impeccable precision thanks to a reader capable of stopping the machine as soon as the desired angle is reached.

Read less...

To contact Delahenty Machinery about Ofmer Rebar Bender Evo Series use Get a quote.