Peak Scientific Purge Gas Generator | PG14L ...
Peak Scientific - Purge Gas Generator | PG14L
PG14L Purge Gas Generator
The PG14L gas generator from Peak Scientific is suitable for laboratory detectors requiring CO2 free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.
Requiring minimal maintenance, the PG14L does require an external source of air to operate and can be supported by the Precision Air Compressor.
Features
- Purge Gas (PG) generators from Peak Scientific produce air which is free of CO2
- Ideal for commercial labs with a high throughput rate of samples
- High performance filters and PSA ensure maximum reduction of moisture (< -70ºC dew point).
- Few moving parts means minimum maintenance requirements and 24/7 performance
- Position generator where required, wall mountable for small labs
- More cost effective than any other gas supply as the FT-IR detector needs a constant flow of gas
- Completely silent in operation
- Can be supported by Precision Air Compressor
- 12 month full comprehensive on-site warranty
Specifications
Gas
- Gas Type: Air
- Max Gas Flow: 14L/min
- Max Output Pressure: 100psi/6.9bar
- Max Purity: <1ppm CO2
Site & Installation
- Gas Outlets Fitting: 1/4” BSP Female
- Min Inlet Pressure: 100psi/6.9bar
- Max Inlet Pressure: 120psi/8.3bar
- Power Consumption: 240 W
- Voltage: 120 - 240 V
- Frequency: 50 / 60 Hz
- Current: 8 A
- Max Operating Temp: 25°C / 77°F
- Particles: < 0.01 µm
- Accreditations: CE
Dimension & Weight
- Size (HxWxD) mm: 660 x 459 x 162 mm
- Size (HxWxD) Inches: 26 x 18.1 x 6.4 inches
- Generator Weight: 14kg / 30.8lbs
Service Requirements
- Annual replacement of particulate filters
To contact Peak Scientific Instruments about Peak Scientific Purge Gas Generator | PG14L use Get a quote.
The PG14L gas generator from Peak Scientific is suitable for laboratory detectors requiring CO2 free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.
Requiring minimal maintenance, the PG14L does require an external source of air to operate and can be supported by the Precision Air Compressor.
Features
- Purge Gas (PG) generators from Peak Scientific produce air which is free of CO2
- Ideal for commercial labs with a high throughput rate of samples
- High performance filters and PSA ensure maximum reduction of moisture (< -70ºC dew point).
- Few moving parts means minimum maintenance requirements and 24/7 performance
- Position generator where required, wall mountable for small labs
- More cost effective than any other gas supply as the FT-IR detector needs a constant flow of gas
- Completely silent in operation
- Can be supported by Precision Air Compressor
- 12 month full comprehensive on-site warranty
Specifications
Gas
- Gas Type: Air
- Max Gas Flow: 14L/min
- Max Output Pressure: 100psi/6.9bar
- Max Purity: <1ppm CO2
Site & Installation
- Gas Outlets Fitting: 1/4” BSP Female
- Min Inlet Pressure: 100psi/6.9bar
- Max Inlet Pressure: 120psi/8.3bar
- Power Consumption: 240 W
- Voltage: 120 - 240 V
- Frequency: 50 / 60 Hz
- Current: 8 A
- Max Operating Temp: 25°C / 77°F
- Particles: < 0.01 µm
- Accreditations: CE
Dimension & Weight
- Size (HxWxD) mm: 660 x 459 x 162 mm
- Size (HxWxD) Inches: 26 x 18.1 x 6.4 inches
- Generator Weight: 14kg / 30.8lbs
Service Requirements
- Annual replacement of particulate filters
To contact Peak Scientific Instruments about Peak Scientific Purge Gas Generator | PG14L use Get a quote.
Peak Scientific’s PG14L is a purge gas generator that supplies CO2-free air for laboratory detectors, including FT-IR analysis. Its Pressure Swing Adsorption technology removes organic contaminants and moisture from air, providing a consistent flow with little background noise during laboratory analysis. Small laboratories can wall-mount the generator to place it where required in the lab.
- Maximum gas flow: 14 L/min
- Maximum output pressure: 100 psi/6.9 bar
- Maximum purity: <1 ppm CO2
- External air inlet pressure: 100–120 psi (6.9–8.3 bar)
- 12-month full on-site warranty
Source: listing by Peak Scientific Instruments on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Peak Scientific Instruments on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Nitrogen Gas Generators
Nitrogen Gas Generator | Membrane NGM series
Nitrogen Gas Generator | NGM⁺ 7-70
Nitrogen Gas Generator | NGPs 2-9 PSA
Nitrogen Gas Generator | NGP 10-115 PSA
Nitrogen Gas Generator | NGP⁺ 8-2800 premium N₂
Nitrogen Gas Generation
Absolute Filters Membrane Nitrogen Generators
Nitrogen Generator Systems | Oxymat
Nitrogen Gas Generator | Genius XE SMZ
Precision Nitrogen Headspace 250 - N2 Generator
Nitrogen and Dry Air Gas Generator | Genius 3045
Nitrogen Generator - NiGen LCMS
Membrane Nitrogen Gas Generator | HFX Series
Nitrogen Gas Generator | Saturn Series
Nitrogen & Oxygen Gas Generators
Ultra Dry Gas Generator | UDA-300
TOC Gas Generators
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales