Post-Column Reaction System PCR

Read more...

To contact Allabin Pty Ltd about Post-Column Reaction System PCR use Get a quote.

System Features

Fast and easy to set.

• The installation can be completed by simply interfacing between the chromatographic column and the detector.

Modular Design

• Optional one or two reactive cores.
• Both heating reaction and room temperature reaction are available.
• Optional one, two or more reagent delivery pumps.
• Lessen joints and tubes to prevent leaking.
• All joints are located on the front to make it easy to operate.
• Auto self-flushing system to extend life of the piston seals.
• Built-in vent valve. (PEEK)
• Built-in pressure sensor.
• Driven by digital motor.
• Rapid filling with electric compensation.
• Display: flow rate, pressure setting, Temperature, and status.
• Digital keypad: flow rate setting, pressure setting, lower/upper limit of pressure setting, and temperature setting.
• Sealed multi-direction flowing reactive core guarantees the mixing efficiency.
• Digital control on front panel: temperature setting, temperature display, ready display.

Analysis Applications

• Amino acid analysis. (Amino acid, Taurine)
• Pesticide residues detection. (Carbamates)
• Herbicide leftover detection. (Glyphosate, Paraquat, Aquacide. etc)
• Variety of toxin. (Aflatoxin, Vomitoxin, Saxitoxin. etc.)
• Amino glycosides type, polyether type of antibiotics.
• Pharmaceutical analysis. (Voglibose, Erythrocin. etc)
• Phenylketonuria (PKU)/Maple syrup urine detection and screening in neonate
• Others such as, biogenic amine, bromate, methanal, chrome VI and guanidine.

Applications

• Water and soil residues detection.
• Nutrition analysis, detection of pollution and residues in feed industry.
• Trophic analysis, detection of toxin and residues in food industry.
• Monitoring of clinical diagnosis and prenatal screening.
• Quality control of pharmaceutical and residues monitoring.

Front Panel keyboard and display, convenient to setup

• The front panel of the reactor shows the setpoint and actual temperatures of the reaction core.
• Display the flow rate, pressure and pressure limit.
• Flow rate and temperature of reactor can be controlled either via the front panel, or remotely via RS232.
• Modular reactive core, only two connectors needed to replace the core.
• Newly designed, sharply decreasing the diffusion of peak.
• All flow paths in the system are PEEK.

Read less...

To contact Allabin Pty Ltd about Post-Column Reaction System PCR use Get a quote.