Comac Section and Profile Rolling Machine ...

Comac - Section and Profile Rolling Machine - MODEL 303HV Price Guide: $35,000

Supplier: Delahenty Machinery

Comac - 303HV section roller

1/6

All models are available in several versions, conventional, with programmable positioners and with CNC Control.

high rate of accuracy and consistency

Priced from $35,000

* Bending rolls independently adjustable, for double pre-bending capability on the leading and trailing end of symmetrical profiles
* 3 driving rolls to guarantee maximum drive on the profile
* Lateral guide rolls with three-dimensional adjustment
* Standard bending rolls of alloy steel, heat treated to surface hardness 60 HRC
* Modular rolls that allow the bending of most profiles
* Free standing remote control station to control the machine in safety
* Possibility to install the machine both in vertical and horizontal position
* Torque limiter installed on top roll shaft
* One-piece fabricated steel frame
* Shaft and pinions installed on high dynamic load roller bearings
* Gears coupled directly on a splined shaft
* Water-based environmentally friendly paint
* Machines compliant to 2006/42/CE standard

Control Options
* Standard machines are controlled by means of a push-button board that allows the variation of the position of the bending rolls and by a pedal that controls the advance and retreat of the profile.
* Depending on the deformation work to be performed, numerous additional controls are available like, for example, the hydraulic regulation of the lateral guide rolls, the speed regulation by means of a potentiometer, the double speed positioning of the bending rolls, and the remote control of the special tooling.
* In case high repeatability is required or if particular bending geometries must be achieved, the machines are equipped with programmable positioner (NC), numerical controls with independent axes, and numerical controls with interpolated axes (CNC).

Section modulus [cm³] 6
Diameter of shafts (Upper/Lower) [mm] 50
Diameter of rolls [mm] 180
Power output [kW] 3
Rolling speed [m/min] 5,5
Weight [kg] 720

To contact Delahenty Machinery about Comac Section and Profile Rolling Machine - MODEL 303HV use Get a quote.

Priced from $35,000

Section modulus [cm³] 6
Diameter of shafts (Upper/Lower) [mm] 50
Diameter of rolls [mm] 180
Power output [kW] 3
Rolling speed [m/min] 5,5
Weight [kg] 720

Read less...

To contact Delahenty Machinery about Comac Section and Profile Rolling Machine - MODEL 303HV use Get a quote.

Comac-Catalogo301-305-rid(1.91MB)

AI Overview BETA

The Comac 303HV is a section and profile rolling machine that bends metal profiles with independently adjustable rolls for pre-bending. Three driven rolls provide maximum drive on profiles as they pass through the machine. For repeatable work or specific bending geometries, programmable positioners and numerical controls are available, including CNC and independent- or interpolated-axis options.

Lateral guide rolls adjust in three dimensions
Complies with the 2006/42/CE standard
6 cm³ section modulus
3 kW power output
Rolling speed: 5.5 m/min

Source: listing by Delahenty Machinery on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Delahenty Machinery provide you with a quote

Supplier

Supplier: Delahenty Machinery

Distribution: Australia & New Zealand Only

Location: Knoxfield, VIC

Customers: Preston General Eng, Triple 8 Racing, ARB, Hilton, Norton Gates, Jayco, Nelson Global,

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Delahenty Machinery are also proudly displaying these credentials:

Established:

1964

Employees:

6-20

Customers:

Preston General Eng, Triple 8 Racing, ARB, Hilton, Norton Gates, Jayco, Nelson Global,

Memberships:

AMTIL, Victorian Chamber of Commerce and Industry

Distribution:

Australia & New Zealand Only

Location:

Knoxfield , VIC