Sigra - Field Data Logger | V10

Read more...

To contact Sigra about Sigra Field Data Logger | V10 use Get a quote.

Applications for this product

• Landslide or excavation monitoring
• Groundwater monitoring

Features of this product

• The loggers will directly read many kinds of transducer including those with voltage or frequency outputs, vibrating wire transducers or resistance devices.
• Multi-logger setups (supporting additional transducers) can be interconnected via an RS485 bus. These loggers can additionally be setup in a master slave configuration and take readings in turn.
• Windows based software allows the setup and downloading of the data logger via any communications interface.
• The Sigra Data Logger V10 comes with a 32 GB micro-SD card built-in to permit lifetime storage.
• The internal clock chip with a built-in crystal oscillator has a time drift of less than 2 minutes a year across the full operating temperature range. Less than 20 seconds of drift is achievable if maintained between 10 and 40 degrees Celsius.
• The V10 Data Logger (IP65 version) now has a built-in Low Voltage Disconnect (LVD) to protect the batteries from extreme discharge. This prevents the early failure of cells.

Specifications of this product

• 8 Channels for Voltage, Resistance and Frequency.
• 4 may be used for Vibrating Wire (Odd Channels).
• 4 may be used for Counting Inputs (Even channels).
• Vibrating Wire: Range: 0.5 – 5 kHz; Resolution: 0.01 Hz; Raw unit: 0.1 Hz
• Resistance: Range: 0 – 330 k?; Resolution: 1 ?; Raw unit: 1 ?
• Voltage: Range: 0 – 5 V (Use an external potential divider for higher voltages); Resolution: 77 µV (16 bit); Raw unit: 77 µV
• Radio: Frequency: 2.4 GHz ISM Band or 920 MHz; Transmit Power: 63mW and 250 mW respectively; Reliable range: 0.6 km and 2.5 km respectively – dependent on local conditions and topography
• DIN Mounting: IP20
• Weatherproof enclosure: IP65

Read less...

To contact Sigra about Sigra Field Data Logger | V10 use Get a quote.