Voltage/current ratio can be set to expand measuring range;
Sound & light alarm for voltage/current/power over limit, satisfy fast identification of defected products on production line;
Minimum current measurement range is low to 0.1 mA, meet the test requirement of standby power consumption;
Wide AC/DC range, suitable for various loads;
RS-232/RS-485 port to realize automatic testing and data transmission;
Optional I/O port to realize remote control signal input and alarm signal output.
Parameter settings: voltage/current ratio, integral threshold current, electric energy accumulating time, voltage upper-lower limit, current upper/lower limit, power upper-lower limits, alarm delay time, address, baud rate, buzzer On/Off, calculation mode and other parameters can be set, and preset parameters will be memorized;
Over limit alarm: sound & light alarm as a certain parameter is out if the preset range, giving sound & light alarm signal, automatically and output the digital signal (optional);
Switch of range: manual set to range, or power meter will automatically switch to a proper range under Auto range mode;
Accumulating Time: electric energy accumulating time can be set;
Energy accumulation: display the accumulated electric energy within the preset time;
Ratio settings: voltage/current ratios can be set based on the actual measurement and the ratio of primary and secondary of external transformer, easy expansion;
Serial communication: test results can be collected via RS-232 or RS-485 (optional) on computer.
TestPower | Electronic Test & Measurement Equipment.
Test Power is the sole and exclusive distributor for the Ainuo product range in Australia and New Zealand. Ainuo manufacture Electrical Safety Compliance Testers, AC Power Sources, DC Power Supplies, ...