Unimig Arc Welder | RAZOR 160 PFC

Unimig - Arc Welder | RAZOR 160 PFC Price Guide: $725

Supplier: Eureka Gas and Gear

Arc Welder | RAZOR 160 PFC

The RAZOR™ ARC 160 PFC. Fitted with a 10 AMP plug, this machine is designed to be taken between the workshop and worksites. Connecting a 1

In Stock

Features of this product

Lift Arc ignition allows the arc to be started easily in DC TIG by simply touching the tungsten to the work piece and lifting it up to start the arc.
This stops the tungsten tip sticking to the work piece and breaking the tip from the tungsten electrode.
PFC gives you maximum electrical efficiency. It also automatically compensates for any voltage fluctuation.

Specifications of this product

We have various models and specifications in our range. These details are for the Arc Welder | RAZOR 160 PFC. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

Primary Input Voltage: 240v Single Phase
Supply Plug: 10 Amp
Rated Input Power (Kva): 7.1
Ieff (A): 10.0
Rated Output: 10-160a
No Load Voltage (V): 78
Protection Class: Ip21s
Insulation Class: F
Power Factor: 0.99
Minimum Generator (Kva): 8.0
Dinse Connector: 35/50
Standard: As/Nz60974-1
Suitable Material: Mild Steel, Stainless Steel, Copper, Cast Iron

To contact Eureka Gas and Gear about Unimig Arc Welder | RAZOR 160 PFC use Get a quote.

Features of this product

Lift Arc ignition allows the arc to be started easily in DC TIG by simply touching the tungsten to the work piece and lifting it up to start the arc.
This stops the tungsten tip sticking to the work piece and breaking the tip from the tungsten electrode.
PFC gives you maximum electrical efficiency. It also automatically compensates for any voltage fluctuation.

Specifications of this product