Adkins Heat Press | The Adkins Omega 1000 ...

Adkins - Heat Press | The Adkins Omega 1000

Supplier: Leapfrog Machinery

Heat Press | The Adkins Omega 1000

1/3

The Omega Series 1000 Dual Base Pneumatic Press has been Specifically Designed for Companies Requiring a Commercial Quality Press to Satisfy Increased Production levels.

In Stock

The Dual Base Operation Boosts Efficiency as You can Load Base 1, while Base 2 is Pressing. With Digital Time & Temperature Controls for Consistent Accuracy, this is The Press for Volume situations.

Is it Safe?

Absolutely ! Both Operating Buttons have to be Pushed Simultaneously to Lower the Heat Plate and it will Not Operate until the Heat Plate is Correctly above the Base. See the Other Key Safety Features below.

Will it Be Easier on My Staff?

Certainly ! And Remember Weary Staff are Less Productive and More Likely to Succumb to Injury.

Benefits to You of the Adkins Omega 1000

Swing Head Operation (manual) – Means a Clear View of Working areas.
Adjustable, Accurate and Lock-In Air Pressure Control – Gives You Consistent Work.
Emergency stop button – Safety is a Prime Consideration of the Press Design.
Heat Plates will Not Operate until Directly over the Base – Another Safety Feature.
Heat Resistant Silicone Base Pads are Fixed to each Base – To Achieve the Best Transferring Result
Minimal Space requirement – Save some Rent
Manufactured and Tested to comply with EC Safety Regulations. CE labelled.
12 Month Warranty on this Press
Operations Manual comes Complete with Exploded Diagram of Press, Parts List, and Electrical Wiring Diagrams,
Thermal Cut-Out on the Heating Element Shuts Off power to the Elements if the Temperature exceeds 235ºC +/-15ºC

The Omega 1000 is Supplied with this Size Bases: 38 cm x 50 cm (15 in x 20 in) – Part No. BMC017

The Following Optional Bases (Tables) are Available when you place your Press Order.

Optional table: 15.3 cm x 15.3 cm (6 in x 6 in) – Part No. BMC584
Optional table: 20.5 cm x 20.5 cm (8 in x 8 in) – Part No. BMC583
Optional table: 25.4 cm x 25.4 cm (10 in x 10 in) – Part No. BMC582
Optional table: 30.5 cm x 30.5 cm (12 in x 12 in) – Part No. BMC581
Optional table: 30.5 cm x 15.3 cm (12 in x 6 in) – Part No. BMC585
Optional table: 38 cm x 38 cm (15 in x 15 in) – Part No. BMC16

Optional umbrella table: Part No. BMC586 (Only one Umbrella table can be used at a time).

Technical Specifications

Power Supply: Single Phase 15Amp
Compressed Air Supply: 7 bar max
Compressed Air Consumption: 60 litres/min
Working Temperature: 70-235°C
Display Timer Range: 0 – 9.59 min
Machine Height Open: 74 cm
Machine width: 92cm
Machine depth: 83cm
Work area required: 122 x 137 x 74 cm

To contact Leapfrog Machinery about Adkins Heat Press | The Adkins Omega 1000 use Get a quote.