DEPRAG Programmable Electric Screwdrivers ...

DEPRAG - Programmable Electric Screwdrivers | Minimat-E

Supplier: Assembly Technologies Pty Ltd

Programmable Electric Screwdrivers | Minimat-E

Ergonomic Handheld Drivers

1/2

Deprag's Minimat-E Programmable Electric Screwdrivers allow the measurement and storage of torque and angle.

1194 Recent Views In Stock

Deprag have widened their Minimat E range of programmable EC Screwdrivers. The range features straight, pistol grip and angle head hand held tools as well as drivers for machine mounting. Hand guided drivers for use with screwfeeders are also available.

Programmable screwdrivers are especially useful where flexibility in torque and angle are required and where torque or angle measurement or documentation is necessary for quality or safety reasons.

Deprag's Minimat E range of screwdrivers finally offer affordable programmable screwdrivers to the Assembly Industry.

The Minimat E controller can store up to 16 programs and the screwdriver can be programmed to assemble to torque with angle measurement or to angle with torque measurement, as well as various other screw tightening options. This allows the one tool to assemble screws to different torques on the one part, or be quickly changed over for a different part if required.

The controller can also be configured to count the number of screws per part, and even clamp the part until all screws are assembled.

The controller has an ethernet port and PLC interface. No software is required for programming. A web server is used for updating programs and downloading data.

Up to 7 days torque and angle measurements can be stored and the controller will signal all faulty assemblies.

Torque-Shut Off is based on current evaluation (no Torque Transducer implemented)
Brushless EC-Motor with current-sensing controller that guarantees low-maintenance operation, minimal down-time, excellent motor dynamics and high upper torque limit
Torque or Angle Control and measurement
Ability to count screws per part and lock part until all screws are assembled
Standard Deviation < 3%
Same Controller is used for handheld and stationary tools
Hand Held and machine mount tools available from 0.03 up to 18Nm
Hand pieces for auto screw feeding are also available

For more information on Programmable Servo Drive Screwdrivers please call or use the IndustrySearch email for a direct reply.

To contact Assembly Technologies Pty Ltd about DEPRAG Programmable Electric Screwdrivers | Minimat-E use Get a quote.

Programmable screwdrivers are especially useful where flexibility in torque and angle are required and where torque or angle measurement or documentation is necessary for quality or safety reasons.

Deprag's Minimat E range of screwdrivers finally offer affordable programmable screwdrivers to the Assembly Industry.

The controller can also be configured to count the number of screws per part, and even clamp the part until all screws are assembled.

The controller has an ethernet port and PLC interface. No software is required for programming. A web server is used for updating programs and downloading data.

Up to 7 days torque and angle measurements can be stored and the controller will signal all faulty assemblies.

Torque-Shut Off is based on current evaluation (no Torque Transducer implemented)
Brushless EC-Motor with current-sensing controller that guarantees low-maintenance operation, minimal down-time, excellent motor dynamics and high upper torque limit
Torque or Angle Control and measurement
Ability to count screws per part and lock part until all screws are assembled
Standard Deviation < 3%
Same Controller is used for handheld and stationary tools
Hand Held and machine mount tools available from 0.03 up to 18Nm
Hand pieces for auto screw feeding are also available

For more information on Programmable Servo Drive Screwdrivers please call or use the IndustrySearch email for a direct reply.

Read less...

To contact Assembly Technologies Pty Ltd about DEPRAG Programmable Electric Screwdrivers | Minimat-E use Get a quote.

AI Overview BETA

The DEPRAG Minimat-E is a programmable electric screwdriver range for tightening screws to controlled torque or angle settings. Its controller stores up to 16 programs, letting operators switch settings when assembling different parts. Assembly operations that need each part fully fastened can use screw counting and part clamping to hold work until all screws are installed.

Controller connects through Ethernet and a PLC interface
A web server updates programs and downloads data; programming requires no software
Stores torque and angle readings for up to 7 days; signals faulty assemblies
Handheld and machine-mount drivers span 0.03 to 18 Nm
Straight, pistol-grip and angle-head handheld versions are available

Source: listing by Assembly Technologies Pty Ltd on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Assembly Technologies Pty Ltd provide you with a quote

Supplier

Supplier: Assembly Technologies Pty Ltd

Distribution: Australia & New Zealand

Location: Carlingford, NSW

Customers: Nissan Castings, Hella, Resmed, Continental

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Assembly Technologies Pty Ltd are also proudly displaying these credentials:

Established:

2006

Employees:

1-5

Customers:

Nissan Castings, Hella, Resmed, Continental

Memberships:

NSW Business Chamber

Certifications:

CE, ATEX

Distribution:

Australia & New Zealand