Innovec Controls IDA4 Level Controller

Innovec Controls - IDA4 Level Controller Price Guide: $595

Supplier: Innovec Controls

IDA4 Level Controller

1/3

The IDA4 level Controller has four set point relays with changeover contacts and 99% dead-band, is powered from 85 to 265VAC or 18 to 40VDC with a 8 digit display and is supplied in a din rail enclosure.

easy to use and configure

FEATURES

Accepts all standard process signals

85 to 265VAC 47-63 Hz supply or factory fitted 24VDC isolated supply
Microprocessor based
Low cost - High performance
Screw terminal electrical connection
Four set point relays with form C contacts
High contrast 6 digits blue OLED display of 10 mm digit height
Din rail mount enclosure
24VDC loop supply for 2 wire transmitters
Digital instrument with EEPROM storage of programmed variables and touch switch programming of input range, output on and off point, high, low or control operation, display intensity and decimal point position

EMC compliant

Innovec is an ISO9001:2015 Quality Assured Company
TECHNICAL SPECIFICATIONS

Input Details

The instrument has a 16 bit bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the ratio metric measurement system. The standard instrument is set for 4-20mA and 0-10VDC operation and can have units from 0 60,000. Other ranges are available. Please consult factory.

Outputs

Four switch point relays are provided with form C (changeover) contacts rated at five (5) amperes 240VAC resistive.
Each output can be configured as active high, active low with hysteresis or control alarm [output configured to be active between high and low set points].

Communication

The IDA4 has Bluetooth or RS485 using Modbus RTU protocol communication

Display

The IDA4 has a 6 digit 10mm character height high contrast Blue (OLED) display with a viewing distance of 3 metres.

Decimal Point

The decimal point position is programmed from the front panel.

Environmental Parameters

0-70 degrees Celsius and 0-90% rh non-condensing.

Connection Details

Terminal 1: Input common (-)	Terminal 2: mA input (+)	Terminal 3: voltage input (+)
Terminal 4: 24VDC loop supply	Terminal 5: not used	Terminal 6: not used
Terminal 7: not used	Terminal 8: not used	Terminal 9: not used
Terminal 10: not used	Terminal 11: not used	Terminal 12: ma output (-)
Terminal 13: ma output (+)	Terminal 14: Voltage output (-)	Terminal 15: Voltage output (+)
Terminal 16: relay 1 common contact	Terminal 17: relay 1 normally open contact	Terminal 18: relay 1 normally closed contact
Terminal 19: relay 2 common contact	Terminal 20: relay 2 normally open contact	Terminal 21: relay AL2 normally closed contact
Terminal 22: relay AL3 common contact	Terminal 23: relay AL3 normally open contact	Terminal 24: relay AL3 normally closed contact
Terminal 25: relay 4 common contact	Terminal 26: relay AL4 normally open contact	Terminal 27: relay AL4 normally closed contact
Terminal 28: VAC active or VDC (+) supply	Terminal 29: VAC neutral or VDC(-) supply	Terminal 30: Ground supply

Instrument Power Supply

85 to 265VAC 47-63 Hz or factory fitted DC to DC converter from 12 to 36VDC.

Transducer Power Supply

A 24VDC at 30mA transducer power supply.

Weight

400 grams.

Mounting Details

Din rail mounting enclosure 100 mm wide by 75 mm high by 110 mm deep.

Configuration of the Instrument

This is a digital instrument and the display intensity, decimal points, input range, relays on and off switch points and hysteresis are programmed by the front touch buttons and the values are stored in EEPROM for 10 years.

Ordering Information

Model/input signal/display units/power supply/options.

Sample number: IDA4/4-20mA/0-100.00/VAC
All units shipped factory calibrated to 4-20mA equals 0-100.00 unless specified

To contact Innovec Controls about Innovec Controls IDA4 Level Controller use Get a quote.

FEATURES

Accepts all standard process signals

85 to 265VAC 47-63 Hz supply or factory fitted 24VDC isolated supply
Microprocessor based
Low cost - High performance
Screw terminal electrical connection
Four set point relays with form C contacts
High contrast 6 digits blue OLED display of 10 mm digit height
Din rail mount enclosure
24VDC loop supply for 2 wire transmitters
Digital instrument with EEPROM storage of programmed variables and touch switch programming of input range, output on and off point, high, low or control operation, display intensity and decimal point position

EMC compliant

Innovec is an ISO9001:2015 Quality Assured Company
TECHNICAL SPECIFICATIONS

Input Details

Outputs

Four switch point relays are provided with form C (changeover) contacts rated at five (5) amperes 240VAC resistive.
Each output can be configured as active high, active low with hysteresis or control alarm [output configured to be active between high and low set points].

Communication

The IDA4 has Bluetooth or RS485 using Modbus RTU protocol communication

Display

The IDA4 has a 6 digit 10mm character height high contrast Blue (OLED) display with a viewing distance of 3 metres.

Decimal Point

The decimal point position is programmed from the front panel.

Environmental Parameters

0-70 degrees Celsius and 0-90% rh non-condensing.

Connection Details

Terminal 1: Input common (-)	Terminal 2: mA input (+)	Terminal 3: voltage input (+)
Terminal 4: 24VDC loop supply	Terminal 5: not used	Terminal 6: not used
Terminal 7: not used	Terminal 8: not used	Terminal 9: not used
Terminal 10: not used	Terminal 11: not used	Terminal 12: ma output (-)
Terminal 13: ma output (+)	Terminal 14: Voltage output (-)	Terminal 15: Voltage output (+)
Terminal 16: relay 1 common contact	Terminal 17: relay 1 normally open contact	Terminal 18: relay 1 normally closed contact
Terminal 19: relay 2 common contact	Terminal 20: relay 2 normally open contact	Terminal 21: relay AL2 normally closed contact
Terminal 22: relay AL3 common contact	Terminal 23: relay AL3 normally open contact	Terminal 24: relay AL3 normally closed contact
Terminal 25: relay 4 common contact	Terminal 26: relay AL4 normally open contact	Terminal 27: relay AL4 normally closed contact
Terminal 28: VAC active or VDC (+) supply	Terminal 29: VAC neutral or VDC(-) supply	Terminal 30: Ground supply

Instrument Power Supply

85 to 265VAC 47-63 Hz or factory fitted DC to DC converter from 12 to 36VDC.

Transducer Power Supply

A 24VDC at 30mA transducer power supply.

Weight

400 grams.

Mounting Details

Din rail mounting enclosure 100 mm wide by 75 mm high by 110 mm deep.

Configuration of the Instrument

This is a digital instrument and the display intensity, decimal points, input range, relays on and off switch points and hysteresis are programmed by the front touch buttons and the values are stored in EEPROM for 10 years.

Ordering Information

Model/input signal/display units/power supply/options.

Sample number: IDA4/4-20mA/0-100.00/VAC
All units shipped factory calibrated to 4-20mA equals 0-100.00 unless specified

Read less...

To contact Innovec Controls about Innovec Controls IDA4 Level Controller use Get a quote.

AI Overview BETA

Innovec Controls’ IDA4 is a level controller that accepts standard process signals and changes its relay outputs at programmed set points. Its four relays support high or low switching, hysteresis, or control-alarm operation, so outputs follow the selected mode. For process-control tasks, front-panel buttons set the input range, decimal position and display brightness, with programmed values retained in EEPROM.

85 to 265 VAC power supply
Four form C relay contacts rated 5 amperes at 240 VAC resistive
Bluetooth or RS485 communication using Modbus RTU
Blue OLED display has 10 mm characters and a 3 metre viewing distance
24 VDC transducer supply at 30 mA

Source: listing by Innovec Controls on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Innovec Controls provide you with a quote

Supplier

Supplier: Innovec Controls

Distribution: Australia-wide

Location: St Leonards, NSW

Customers: transport NSW bombardier transportation, UGL, Progress Rail Australia, Progress Rail USA,

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Innovec Controls are also proudly displaying these credentials:

Established:

1987

Employees:

1-5

Customers:

transport NSW bombardier transportation, UGL, Progress Rail Australia, Progress Rail USA,

Certifications:

iso9001:2015

Distribution:

Australia-wide

Location:

St Leonards , NSW