IFM Efector - Vibration Sensor | VVB001 Price Guide: $795 Get latest price

Vibration Sensor | VVB001

Vibration Sensor | VVB001

Vibration Sensor | VVB001

In Stock

Features: 

• Condition-based maintenance thanks to monitoring of unbalance, rolling element bearing or gear state
• Large operating temperature range and high protection rating for the requirements of harsh industrial environments
• Reliable and permanent monitoring of characteristic values incl. triggered raw data recording
• Integration in Industrial Ethernet systems without control cabinet and complex wiring
• Asynchronous transmission of raw data (BLOB) and integrated machine operating hours counter

 

Application
Application	industrial machines
Electrical data
Operating voltage [V]	18...30 DC
Current consumption [mA]	< 50
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Sensor type	microelectromechanical system (MEMS)
Inputs / outputs
Number of inputs and outputs	Number of digital outputs: 2
Outputs
Output signal	switching signal; IO-Link
Electrical design	PNP/NPN; (configurable)
Number of digital outputs	2
Output function	normally open / normally closed
Max. voltage drop switching output DC [V]	2
Max. current load per output [mA]	100
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
Measuring/setting range
Note on setpoint SP	parameterisable
Frequency range [Hz]	2...10000
Measuring principle	capacitive
Number of measurement axes	1
v-RMS
Measuring range of vibration [mm/s]	0...45
Set point SP [mm/s]	0.2...45
Reset point rP [mm/s]	0...44.8
In steps of [mm/s]	0.2
a-Peak / a-RMS
Measuring range of vibration	0...50 g 0...490.3 m/s²
Set point SP	0.2...50 g 2...490.3 m/s²
Reset point rP	0...49.8 g 0...488.3 m/s²
In steps of	0.2 g 2 m/s²
Crest
Measuring range of vibration	1...50
Set point SP	2...50
Reset point rP	1...49
In steps of	1
Temperature measurement
Measuring range [°C]	-30...80
Resolution [°C]	0.1
Set point SP [°C]	-28...80
Reset point rP [°C]	-30...78
In steps of [°C]	2
Accuracy / deviations
Accuracy	≤ 4 kHz +/-10 %; ≥ 4...10 kHz: < 3 dB
Accuracy [K]	± 2,5 K + (0,2 x (Umgebungstemperatur - Oberflächentemperatur))
Linearity deviation	2 %
Software / programming
Parameter setting options	Software
Diagnostic functions	self-test
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud); COM3 (230,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9: 2013-07
Profiles	Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000)
SIO mode	yes
Required master port type	A
Process data analogue	10
Process data binary	2
Min. process cycle time [ms]	3.6
IO-Link functions (acyclical)	filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; switch points; switching logic
Supported DeviceIDs	Type of operation DeviceID Status A (COM2) 1028 Status B (COM2 / COM3) 1367
Note	For further information please see the IODD PDF file under "Downloads"
Operating conditions
Ambient temperature [°C]	-30...80
Storage temperature [°C]	-30...80
Protection	IP 67; IP 68; IP 69K
Tests / approvals
EMC	2014/30/EU   DIN EN 61000-6-2   DIN EN 61000-6-3
Shock resistance	DIN EN 60068-2-27 50 g 11 ms   500 g 1 ms
Vibration resistance	DIN EN 60068-2-6 20 g / 10...3000 Hz
UL approval	Ta -30...70 °C UL Approval no. L002
Mechanical data
Weight [g]	116
Type of mounting	set screw
Materials	housing: stainless steel (1.4404 / 316L)
Tightening torque [Nm]	8
Accessories
Items supplied	set screw: 1 x 1/4" 28 UNF / M8 set screw: 1 x 1/4"28 UNF x 5/8" DIN916
Remarks
Pack quantity	1 pcs.
Electrical connection
	Connector: 1 x M12; Maximum cable length: 20 m

 

Read more...

To contact ifm efector about IFM Efector Vibration Sensor | VVB001 use Get a quote.

Features: 

• Condition-based maintenance thanks to monitoring of unbalance, rolling element bearing or gear state
• Large operating temperature range and high protection rating for the requirements of harsh industrial environments
• Reliable and permanent monitoring of characteristic values incl. triggered raw data recording
• Integration in Industrial Ethernet systems without control cabinet and complex wiring
• Asynchronous transmission of raw data (BLOB) and integrated machine operating hours counter

 

Application
Application	industrial machines
Electrical data
Operating voltage [V]	18...30 DC
Current consumption [mA]	< 50
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Sensor type	microelectromechanical system (MEMS)
Inputs / outputs
Number of inputs and outputs	Number of digital outputs: 2
Outputs
Output signal	switching signal; IO-Link
Electrical design	PNP/NPN; (configurable)
Number of digital outputs	2
Output function	normally open / normally closed
Max. voltage drop switching output DC [V]	2
Max. current load per output [mA]	100
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
Measuring/setting range
Note on setpoint SP	parameterisable
Frequency range [Hz]	2...10000
Measuring principle	capacitive
Number of measurement axes	1
v-RMS
Measuring range of vibration [mm/s]	0...45
Set point SP [mm/s]	0.2...45
Reset point rP [mm/s]	0...44.8
In steps of [mm/s]	0.2
a-Peak / a-RMS
Measuring range of vibration	0...50 g 0...490.3 m/s²
Set point SP	0.2...50 g 2...490.3 m/s²
Reset point rP	0...49.8 g 0...488.3 m/s²
In steps of	0.2 g 2 m/s²
Crest
Measuring range of vibration	1...50
Set point SP	2...50
Reset point rP	1...49
In steps of	1
Temperature measurement
Measuring range [°C]	-30...80
Resolution [°C]	0.1
Set point SP [°C]	-28...80
Reset point rP [°C]	-30...78
In steps of [°C]	2
Accuracy / deviations
Accuracy	≤ 4 kHz +/-10 %; ≥ 4...10 kHz: < 3 dB
Accuracy [K]	± 2,5 K + (0,2 x (Umgebungstemperatur - Oberflächentemperatur))
Linearity deviation	2 %
Software / programming
Parameter setting options	Software
Diagnostic functions	self-test
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud); COM3 (230,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9: 2013-07
Profiles	Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000)
SIO mode	yes
Required master port type	A
Process data analogue	10
Process data binary	2
Min. process cycle time [ms]	3.6
IO-Link functions (acyclical)	filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; switch points; switching logic
Supported DeviceIDs	Type of operation DeviceID Status A (COM2) 1028 Status B (COM2 / COM3) 1367
Note	For further information please see the IODD PDF file under "Downloads"
Operating conditions
Ambient temperature [°C]	-30...80
Storage temperature [°C]	-30...80
Protection	IP 67; IP 68; IP 69K
Tests / approvals
EMC	2014/30/EU   DIN EN 61000-6-2   DIN EN 61000-6-3
Shock resistance	DIN EN 60068-2-27 50 g 11 ms   500 g 1 ms
Vibration resistance	DIN EN 60068-2-6 20 g / 10...3000 Hz
UL approval	Ta -30...70 °C UL Approval no. L002
Mechanical data
Weight [g]	116
Type of mounting	set screw
Materials	housing: stainless steel (1.4404 / 316L)
Tightening torque [Nm]	8
Accessories
Items supplied	set screw: 1 x 1/4" 28 UNF / M8 set screw: 1 x 1/4"28 UNF x 5/8" DIN916
Remarks
Pack quantity	1 pcs.
Electrical connection
	Connector: 1 x M12; Maximum cable length: 20 m

 

Read less...

To contact ifm efector about IFM Efector Vibration Sensor | VVB001 use Get a quote.

Installation Instruction VVB001(0.18MB)

Device Manual VVB001(0.39MB)