IFM Efector Radar Level Sensor | LW2720
IFM Efector - Radar Level Sensor | LW2720
Supplier: ifm efector
Certified for use in hygienic areas, Simple installation and maintenance-free operation
Description
Documents
In Stock
Features:
- 80 GHz frequency enables level measurement with millimetre precision of up to 10 metres
- Non-contact measuring principle: no malfunctions due to deposits or wear
- Certified for use in hygienic areas
- Simple installation and maintenance-free operation
- Remote sensor parameter setting and level monitoring via connection to the IT system (NOTE: An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up)
| Product characteristics | |||||
|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Process connection | G 1 Aseptoflex Vario | ||||
| Application | |||||
| Special feature | Gold-plated contacts | ||||
| Dielectric constant of the medium | ≥ 2 | ||||
| Recommended media | water; hydrous media | ||||
| Medium temperature [°C] | -40...150; (see diagram:) | ||||
| Maximum speed of the change of level [mm/s] | 200 | ||||
| Pressure rating [bar] | 8 | ||||
| Note on pressure rating |
|
||||
| Vacuum resistance [mbar] | -1000 | ||||
| MAWP (for applications according to CRN) [bar] | 8 | ||||
| Radio approval for | Australia; USA; Canada; EU/RED; New Zealand | ||||
| Note on radio approval |
|
||||
| Electrical data | |||||
| Operating voltage [V] | 18...30 DC | ||||
| Current consumption [mA] | < 80 | ||||
| Protection class | III | ||||
| Reverse polarity protection | yes | ||||
| Power-on delay time [s] | < 15 | ||||
| Measuring principle | FMCW (80 GHz technology); frequency range 77 - 81 Hz | ||||
| Inputs / outputs | |||||
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Outputs | |||||
| Total number of outputs | 2 | ||||
| Output signal | switching signal; analogue signal; IO-Link | ||||
| Electrical design | PNP/NPN | ||||
| Number of digital outputs | 1; (2 parameterisable) | ||||
| Output function | normally open / normally closed; (parameterisable) | ||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||
| Permanent current rating of switching output DC [mA] | 50 | ||||
| Number of analogue outputs | 1 | ||||
| Analogue current output [mA] | 4...20, invertible; (scalable) | ||||
| Max. load [Ω] | 43,5 * (Ub – 18) – 600 Ω | ||||
| Short-circuit protection | yes | ||||
| Type of short-circuit protection | pulsed | ||||
| Overload protection | yes | ||||
| Measuring/setting range | |||||
| Measuring range [m] | 0.01...10 | ||||
| Sampling rate [Hz] | > 3 | ||||
| Accuracy / deviations | |||||
| Accuracy |
|
||||
| Resolution [mm] | 1 | ||||
| Zero signal (current) [mA] | 3.8 | ||||
| Full signal (current) [mA] | 20.5 | ||||
| Temperature drift per 10 K | ± 1 mm | ||||
| Response times | |||||
| Response time [ms] | 330 | ||||
| Interfaces | |||||
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor ED2: SSCs (0x8001), Measuring Sensor (0x000A) | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 1 | ||||
| Process data binary | 2 | ||||
| Min. process cycle time [ms] | 6 | ||||
| Supported DeviceIDs |
|
||||
| Operating conditions | |||||
| Ambient temperature [°C] | -40...80 | ||||
| Note on ambient temperature |
|
||||
| Storage temperature [°C] | -40...90 | ||||
| Protection | IP 68; IP 69K | ||||
| Tests / approvals | |||||
| EMC |
|
||||
| Shock resistance |
|
||||
| Vibration resistance |
|
||||
| Mechanical data | |||||
| Weight [g] | 627 | ||||
| Materials | stainless steel (1.4404 / 316L); PA; FKM; FVMQ | ||||
| Materials (wetted parts) | PTFE; EPDM | ||||
| Process connection | G 1 Aseptoflex Vario | ||||
| Surface characteristics Ra/Rz of the wetted parts | < 0.76 | ||||
| Remarks | |||||
| Notes | An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up. | ||||
| Pack quantity | 1 pcs. | ||||
| Electrical connection | |||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||
To contact ifm efector about IFM Efector Radar Level Sensor | LW2720 use Get a quote.
Features:
- 80 GHz frequency enables level measurement with millimetre precision of up to 10 metres
- Non-contact measuring principle: no malfunctions due to deposits or wear
- Certified for use in hygienic areas
- Simple installation and maintenance-free operation
- Remote sensor parameter setting and level monitoring via connection to the IT system (NOTE: An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up)
| Product characteristics | |||||
|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Process connection | G 1 Aseptoflex Vario | ||||
| Application | |||||
| Special feature | Gold-plated contacts | ||||
| Dielectric constant of the medium | ≥ 2 | ||||
| Recommended media | water; hydrous media | ||||
| Medium temperature [°C] | -40...150; (see diagram:) | ||||
| Maximum speed of the change of level [mm/s] | 200 | ||||
| Pressure rating [bar] | 8 | ||||
| Note on pressure rating |
|
||||
| Vacuum resistance [mbar] | -1000 | ||||
| MAWP (for applications according to CRN) [bar] | 8 | ||||
| Radio approval for | Australia; USA; Canada; EU/RED; New Zealand | ||||
| Note on radio approval |
|
||||
| Electrical data | |||||
| Operating voltage [V] | 18...30 DC | ||||
| Current consumption [mA] | < 80 | ||||
| Protection class | III | ||||
| Reverse polarity protection | yes | ||||
| Power-on delay time [s] | < 15 | ||||
| Measuring principle | FMCW (80 GHz technology); frequency range 77 - 81 Hz | ||||
| Inputs / outputs | |||||
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 | ||||
| Outputs | |||||
| Total number of outputs | 2 | ||||
| Output signal | switching signal; analogue signal; IO-Link | ||||
| Electrical design | PNP/NPN | ||||
| Number of digital outputs | 1; (2 parameterisable) | ||||
| Output function | normally open / normally closed; (parameterisable) | ||||
| Max. voltage drop switching output DC [V] | 2.5 | ||||
| Permanent current rating of switching output DC [mA] | 50 | ||||
| Number of analogue outputs | 1 | ||||
| Analogue current output [mA] | 4...20, invertible; (scalable) | ||||
| Max. load [Ω] | 43,5 * (Ub – 18) – 600 Ω | ||||
| Short-circuit protection | yes | ||||
| Type of short-circuit protection | pulsed | ||||
| Overload protection | yes | ||||
| Measuring/setting range | |||||
| Measuring range [m] | 0.01...10 | ||||
| Sampling rate [Hz] | > 3 | ||||
| Accuracy / deviations | |||||
| Accuracy |
|
||||
| Resolution [mm] | 1 | ||||
| Zero signal (current) [mA] | 3.8 | ||||
| Full signal (current) [mA] | 20.5 | ||||
| Temperature drift per 10 K | ± 1 mm | ||||
| Response times | |||||
| Response time [ms] | 330 | ||||
| Interfaces | |||||
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor ED2: SSCs (0x8001), Measuring Sensor (0x000A) | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 1 | ||||
| Process data binary | 2 | ||||
| Min. process cycle time [ms] | 6 | ||||
| Supported DeviceIDs |
|
||||
| Operating conditions | |||||
| Ambient temperature [°C] | -40...80 | ||||
| Note on ambient temperature |
|
||||
| Storage temperature [°C] | -40...90 | ||||
| Protection | IP 68; IP 69K | ||||
| Tests / approvals | |||||
| EMC |
|
||||
| Shock resistance |
|
||||
| Vibration resistance |
|
||||
| Mechanical data | |||||
| Weight [g] | 627 | ||||
| Materials | stainless steel (1.4404 / 316L); PA; FKM; FVMQ | ||||
| Materials (wetted parts) | PTFE; EPDM | ||||
| Process connection | G 1 Aseptoflex Vario | ||||
| Surface characteristics Ra/Rz of the wetted parts | < 0.76 | ||||
| Remarks | |||||
| Notes | An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up. | ||||
| Pack quantity | 1 pcs. | ||||
| Electrical connection | |||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||
To contact ifm efector about IFM Efector Radar Level Sensor | LW2720 use Get a quote.
Get a quote
Let ifm efector provide you with a quote
Supplier
Supplier: ifm efector
Location: Mulgrave, VIC
Is this your product?
Manage products / company details |
Report this product
More from this supplier
Vision Sensor - 3D | O3M171
Vibration Sensor | VVB001
Compact Speed Sensor for Hazardous Areas | DI602A
Self-Monitoring Temperature Sensor | TCC501
Flow Sensor | SA5000
Compressed Air Meter | SDG207
Radar Level Sensor | LW2720
Pressure Sensor with Display | PN7071
Ultrasonic Diffuse Reflection Sensor | UIT507
Position Sensor for Rising Stem Valves | IX5010
AS-Interface Inductive Sensor | IM5118
Capacitive High-temperature Sensor | KN5121
IO-Link Position Sensors | OPD101
Inductive High-temperature Sensor | I95045
Related articles from this supplier
You might also like these
Electro-Optic Liquid Level Sensor | ELS-1100
Electro-Optic Liquid Level Sensor - ELS-1200
Sensors for Submersible Level Sensors
Radar Level Sensor
Liquid Level Sensor - Model BI-2000 series
KSR Level Sensors / Transmitters
Level Sensor / Transmitter - Spherical Floats from KSR
Level Sensor | Continuous System - TORRIX
CLC Capacitive Level Sensors
KTE6000CS Hydrostatic Liquid Level Sensors
Sensors | Liquid Level Sensor 0-10m
Level Sensor | Pressure | JUMO MAERA S28 Model 404392
Radar Level Sensor | VEGAPULS WL 61
Radar Level Sensor | VEGAPULS SR 68
Intelligent Corrosive Radar Level sensor
Intelligent Sanitary Radar Level sensor
Intelligent Solid Radar Level sensor
Intelligent Flange Radar Level sensor
Water Level Sensor Radar HyQuant L
Contact ifm efector
Are you a Radar Level Sensor supplier?
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales
learn more
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales