Laser Cutter Fume Extractor Cutting Timber ...

Laser Cutter Fume Extractor Cutting Timber And MDF

Supplier: Plasquip Sales and Smart Manufacturing & Packaging Solutions

1/4

Laser Cutter Fume Extractor Cutting Timber And MDF

In Stock

Fume Extractors for Laser Cutting Non-Metals

PA-800FS-HP-IQ / PA-1200FS-HP-IQ / PA-2000FS-HP-IQ / PA-800TS-LT-HP-IQ / PA-1200TS-LT-HP-IQ Models are designed to be used with Co2 Laser cutters and these fume extraction units are suitable for the dust collection and purification of smoke and odours generated by laser cutting acrylic, PS board, plastic materials, paper, wood/MDF/Plywood and other materials.

Which series one do I need

The FS-HP-IQ suitable for CO2 laser cutting mainly for acrylic/plastic/fabric/abs/PET and those material which mainly produce strong smells. Whilst the TS-LT-HP-IQ suitable is CO2 laser cutting mainly wood/plywood/MDF and those material which mainly produce sticky dust. I hear you asking but hey I cut both. Well then best choose the one that matches the vast majority of your work.

Which size do I need

The PA-800 size machines are suitable for any fully enclosed laser upto and including 1400mm x 900mm cutting table. The PA-1200 machines are perfect for the standard 2500mm x 1300mm open flat bed machines and the PA-2000 series are for machines as large as 3000mm x 3000mm with open beds.

Working Principle

The brushless fan in the purifier generates air volume and negative pressure, sucks the smoke and exhaust gas into the filter, and discharges it indoors after being purified by multi-stage filter elements such as primary, medium, high efficiency and gas filters.

Features and advantages

(1) The body is small in size, low in running noise, and equipped with casters for easy movement;

(2) The FS-HP-IQ and the TS-LT-HP series are both equipped with a high negative pressure brushless fans for stable operation and long service life with large suction power;

(3) The air volume can be adjusted, and the LCD display can check the air volume and gear of the machine;

(4) The control system has a filter element blockage alarm function, prompting to replace the filter element in time;

(5) Configure wireless remote control to facilitate remote operation of the machine. The remote linkage start-stop interface can also be configured;

(6) Multi-stage large-capacity filter to ensure efficient purification of smoke, odour and harmful gases. It can be equipped with a special filter element to purify the smoke and harmful gases generated by PVC materials;

(7) The filtration efficiency of smoke and dust is as high as 99.7%@0.3 microns (our company's self-test), which can be discharged indoors;

(8) The filter element can be replaced separately, which reduces the use cost of the filter element and makes it easier to maintain and replace the filter element;

(9) Stainless steel chassis can be customised according to customer requirements.

(10)With castors, easily to move.

10 Technical Standards

Intelligent (IQ) operating system?
Big capacity filter (BCF) technology?
High precision filtration (HEPA) technology?
Automatic flow control (AFC) technology?
Cabinet High Sealing (CHS) technology?
9% High efficiency odour purification (HEOP) technology?
Multi-voltage compatible (MC) technology?
Filter easy positioning (FEP) technology?
All weather (Worry-free) after-sales service?
ISO The whole process (SureTEST) quality Inspection

To contact Plasquip Sales and Smart Manufacturing & Packaging Solutions about Laser Cutter Fume Extractor Cutting Timber And MDF use Get a quote.