LEDMLD Dual Marker Light for Locomotive ...

LEDMLD Dual Marker Light for Locomotive appplications

Supplier: Innovec Controls

The LEDMLD is a 20-80DC powered DUAL LED MARKER LIGHT (comprising 120 LEDs light emitting diodes] as 60 red and 60 white) supplied in a PANEL mount enclosure with an IP65 weatherproof rating and a minimum light output of 120 Candela for Locomotive .

31 Recent Views In Stock

FEATURES

High intensity LED’s with a 15 degree view angle
Every first led white with every second led red
Nominal 24VDC supply (20-75VDC)
Low cost - High performance
Application is for marker light on railway rolling stock
EMC compliant (CTick)

The LEDMLD marker light is an advanced instrument that have been designed and manufactured to stringent specifications.

The LEDMLD is a Led array suitable for harsh and long life. It has been designed to reject electrical interference that normally abounds in industrial environments and includes flying lead electrical connection.

TECHNICAL SPECIFICATIONS

Display

An array of 120 high contrast LEDs with a light emission angle of 15 degrees for each LED arranged as 60 red and 60 white. This is to give a red and white marker light in the one enclosure. The LEDs are arranged in 16 independent circuits so the loss of one led will not stop the light from functioning. The light intensity has been set for a minimum of 120 Candela and this brightness is constant over the supply range.

Environmental Parameters

-40 to 85 degrees Celsius.

Connection Details

Terminal 1: 24 to 75VDC active supply for the red LEDs (marked red)
Terminal 2: 0VDC supply (flying lead unmarked)

Terminal 3: 24 to 75VDC active supply for the white LEDs (marked white)

Terminal 4: Ground supply (Brass stud)

Wiring is accomplished using Huber & Suhner 4GKW-AX-1.5mm2

Power Supply

24VDC (24-75VDC). Other voltages on request

Current consumption is 120mA 24VDC
Inrush current of 200mA for 80 micro seconds. The current flowing through each LED is controlled by a closed loop feedback circuit. This ensures constant brightness independent of power supply voltage.

Reverse polarity protection (reverse connection will not cause any damage).

Material of manufacture

Housing is metal spun 1.5mm aluminium bright black anodised.
Window is 3mm Makrolon polycarbonate
The light is sealed with Sika Firesil Marine N
All screws are 304 grade stainless steel
Cable entry gland is IP68

Standards

The light output has been set at 120 Candela for the red and white LEDs at one metre.

Weight

LEDMLD is 400 grams.

Mounting Details

Panel mounting black anodised aluminium enclosure of case dimensions 180mm diameter flange by 40mm deep, a body diameter of 134mm (panel cut out) with fixing centres of 163mm wide by 163mm high using an 8mm hole.

Ordering Information

The part number is configured as.
Model/input signal/display units/power supply/options.

Sample number for red/white marker light: LEDMLD/120/100/2075VDC

Innovec Controls is a 9001:2015 registered company

To contact Innovec Controls about LEDMLD Dual Marker Light for Locomotive appplications use Get a quote.

FEATURES

High intensity LED’s with a 15 degree view angle
Every first led white with every second led red
Nominal 24VDC supply (20-75VDC)
Low cost - High performance
Application is for marker light on railway rolling stock
EMC compliant (CTick)

The LEDMLD marker light is an advanced instrument that have been designed and manufactured to stringent specifications.

TECHNICAL SPECIFICATIONS

Display

An array of 120 high contrast LEDs with a light emission angle of 15 degrees for each LED arranged as 60 red and 60 white. This is to give a red and white marker light in the one enclosure. The LEDs are arranged in 16 independent circuits so the loss of one led will not stop the light from functioning. The light intensity has been set for a minimum of 120 Candela and this brightness is constant over the supply range.

Environmental Parameters

-40 to 85 degrees Celsius.

Connection Details

Terminal 1: 24 to 75VDC active supply for the red LEDs (marked red)
Terminal 2: 0VDC supply (flying lead unmarked)

Terminal 3: 24 to 75VDC active supply for the white LEDs (marked white)

Terminal 4: Ground supply (Brass stud)

Wiring is accomplished using Huber & Suhner 4GKW-AX-1.5mm2

Power Supply

24VDC (24-75VDC). Other voltages on request

Current consumption is 120mA 24VDC
Inrush current of 200mA for 80 micro seconds. The current flowing through each LED is controlled by a closed loop feedback circuit. This ensures constant brightness independent of power supply voltage.

Reverse polarity protection (reverse connection will not cause any damage).

Material of manufacture

Housing is metal spun 1.5mm aluminium bright black anodised.
Window is 3mm Makrolon polycarbonate
The light is sealed with Sika Firesil Marine N
All screws are 304 grade stainless steel
Cable entry gland is IP68

Standards

The light output has been set at 120 Candela for the red and white LEDs at one metre.

Weight

LEDMLD is 400 grams.

Mounting Details

Panel mounting black anodised aluminium enclosure of case dimensions 180mm diameter flange by 40mm deep, a body diameter of 134mm (panel cut out) with fixing centres of 163mm wide by 163mm high using an 8mm hole.

Ordering Information

The part number is configured as.
Model/input signal/display units/power supply/options.

Sample number for red/white marker light: LEDMLD/120/100/2075VDC

Innovec Controls is a 9001:2015 registered company

Read less...

To contact Innovec Controls about LEDMLD Dual Marker Light for Locomotive appplications use Get a quote.

AI Overview BETA

The Innovec Controls LEDMLD is a dual LED marker light, combining 60 red and 60 white LEDs in one array. Its 16 independent circuits allow the light to keep functioning if one LED fails, rather than stopping the full array. For railway rolling stock, it is designed to reject electrical interference common in industrial environments.

Minimum light output: 120 candela at one metre for red and white LEDs
15-degree emission angle for each LED
IP65 weatherproof rating
EMC compliant (CTick)
Operating temperature: -40 to 85 degrees Celsius

Source: listing by Innovec Controls on IndustrySearch · Updated 3 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Innovec Controls provide you with a quote

Supplier

Supplier: Innovec Controls

Distribution: Australia-wide

Location: St Leonards, NSW

Customers: transport NSW bombardier transportation, UGL, Progress Rail Australia, Progress Rail USA,

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Innovec Controls are also proudly displaying these credentials:

Established:

1987

Employees:

1-5

Customers:

transport NSW bombardier transportation, UGL, Progress Rail Australia, Progress Rail USA,

Certifications:

iso9001:2015

Distribution:

Australia-wide

Location:

St Leonards , NSW