Marker LED Light | LEDML36 for sale from Innovec Controls

Marker LED Light | LEDML36

Supplier: Innovec Controls

Marker LED Light | LEDML36

The LEDML36 marker light is an advanced instrument that have been designed and manufactured to stringent specifications.

19 Recent Views In Stock

The LEDML36 MARKER LIGHTis a 24VDC powered LED ARRAY (36 LED [light emitting diode]) Marker Light supplied in a panel mount enclosure with an IP65 weatherproof rating that has been chromate converted to Military Spec MIL-C-5541 Class 1A using a ROHS (European directive 2009/95/EC) compliant process. The enclosure is then powder coated appliance white.

Features:

High intensity LED’s with a 15 degree view angle
Available in red and white
Constant light of 110 Lux minimum at one metre
Nominal 24VDC [18-36VDC]
Low cost - High performance
Application is for marker light on railway rolling stock

Specifications:

Display
- An array of 36 high contrast light emitting diode’s (LED) with a light emission angle of 15 degrees for each LED. The led’s are arranged in 6 independent circuits so the loss of one led will not stop the light from functioning.
Environmental Parameters
- -40 to 70 degrees Celsius.
- 0-90% rh non-condensing.
Connection Details - Supplied with Huber and Suhner Cable EN306-2 300V as flying leads
- Terminal 1: 24VDC active supply (marked with red heat shrink)
- Terminal 2: 0VDC supply (marked with black heat shrink)
- Terminal 3:Ground supply (marked with green & yellow heat shrink)
Power Supply
- 24VDC (18-36VDC). Other voltages on request
- Current consumption is 30mA @ 24VDC
- The power supply input to the light is protected by a interference suppression circuit compliant with EN50121
- Reverse polarity protection
Weight
- LEDML36 is 325grams.
Mounting Details
- Supplied in a panel mount enclosure of case dimensions 110mm diameter by 40mm deep with an IP65 weatherproof rating that has been chromate converted to Military Spec MIL-C-5541 Class 1A using a ROHS (European directive 2009/95/EC) compliant process. The enclosure is then powder coated appliance white.
  
  The light incorporates a 4.5mm Makrolon polycarbonate window, 3mm stainless steel clamp ring, silicon foam gaskets and Sika Marine sealant. The light is mounted using 5mm x 25mm stainless steel pan head screws on a 97mm PCD.
Ordering Information
- The part number is configured as.
- Model/input signal/display units/power supply/options.
- Sample number for white marker light: LEDML36/36/120/24VDC/R
- Sample number for white marker light: LEDML36/36/120/24VDC/R

The LEDML36 marker light is an advanced instrument that have been designed and manufactured to stringent specifications. The LEDML36 is a Led array suitable for harsh and long life. It has been designed to be compliant with EN50155 and includes flying lead electrical connection.

To contact Innovec Controls about Marker LED Light | LEDML36 use Get a quote.

Features:

High intensity LED’s with a 15 degree view angle
Available in red and white
Constant light of 110 Lux minimum at one metre
Nominal 24VDC [18-36VDC]
Low cost - High performance
Application is for marker light on railway rolling stock

Specifications:

Display
- An array of 36 high contrast light emitting diode’s (LED) with a light emission angle of 15 degrees for each LED. The led’s are arranged in 6 independent circuits so the loss of one led will not stop the light from functioning.
Environmental Parameters
- -40 to 70 degrees Celsius.
- 0-90% rh non-condensing.
Connection Details - Supplied with Huber and Suhner Cable EN306-2 300V as flying leads
- Terminal 1: 24VDC active supply (marked with red heat shrink)
- Terminal 2: 0VDC supply (marked with black heat shrink)
- Terminal 3:Ground supply (marked with green & yellow heat shrink)
Power Supply
- 24VDC (18-36VDC). Other voltages on request
- Current consumption is 30mA @ 24VDC
- The power supply input to the light is protected by a interference suppression circuit compliant with EN50121
- Reverse polarity protection
Weight
- LEDML36 is 325grams.
Mounting Details
- Supplied in a panel mount enclosure of case dimensions 110mm diameter by 40mm deep with an IP65 weatherproof rating that has been chromate converted to Military Spec MIL-C-5541 Class 1A using a ROHS (European directive 2009/95/EC) compliant process. The enclosure is then powder coated appliance white.
  
  The light incorporates a 4.5mm Makrolon polycarbonate window, 3mm stainless steel clamp ring, silicon foam gaskets and Sika Marine sealant. The light is mounted using 5mm x 25mm stainless steel pan head screws on a 97mm PCD.
Ordering Information
- The part number is configured as.
- Model/input signal/display units/power supply/options.
- Sample number for white marker light: LEDML36/36/120/24VDC/R
- Sample number for white marker light: LEDML36/36/120/24VDC/R

Read less...

To contact Innovec Controls about Marker LED Light | LEDML36 use Get a quote.

AI Overview BETA

The LEDML36 is a panel-mounted marker light with a 36-LED array, appliance-white powder-coated enclosure and nominal 24 VDC power input, supplied with flying-lead electrical connections. Its six independent circuits keep the array operating after an individual LED fails, rather than stopping the whole array. For railway rolling stock, its IP65 weatherproof rating supports installation in weather-exposed locations.

Constant light output of at least 110 lux at one metre
Each LED has a 15-degree light-emission angle
Input interference suppression circuit complies with EN50121
Designed to comply with EN50155
Available in red and white

Source: listing by Innovec Controls on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Innovec Controls provide you with a quote

Supplier

Supplier: Innovec Controls

Distribution: Australia-wide

Location: St Leonards, NSW

Customers: transport NSW bombardier transportation, UGL, Progress Rail Australia, Progress Rail USA,

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Innovec Controls are also proudly displaying these credentials:

Established:

1987

Employees:

1-5

Customers:

transport NSW bombardier transportation, UGL, Progress Rail Australia, Progress Rail USA,

Certifications:

iso9001:2015

Distribution:

Australia-wide

Location:

St Leonards , NSW