Maxon machinery Turret Mill | M630D

Maxon machinery - Turret Mill | M630D

Supplier: Maxon Machinery

Turret Mill | M630D

Metalmaster BM-70VE, NT40 spindle, 70-4200 rpm via inverter, 5hp main motor, table 1500 mm x 305 mm, travels 1050 mm (x), 420 mm (y), 500 mm (z), 3 axis DRO, Pneumatic draw bar.

14 Recent Views In Stock

Features of this product

3 Axis digital readout fitted,
5HP 415V motor, inverter control variable speed system with automatic spindle brake (BM-70VE)
High quality spindle speed control with digital readout
NT40 Spindle taper with a 105mm chrome & ground quill
Digital spindle speed readout
Hardened & ground work table & slide-ways
Square construction slides for X & Z axis to maximise rigidity
Turcite B coated X & Y-Axis slide-ways reduces friction for smooth operation
Pneumatic operation drawbar system for quick and effortless tool change
Powered elevating motor for Z-Axis
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
Inverter controlled feed motors on X & Y-Axis
Micro switch on the manual knee handle for additional operator safety
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Automatic quill feed 0.04, 0.08, 0.13mm/rev
Automatic cut off depth stop on quill
Automatic oil lubrication pump and reservoir
Slide-way covers Y & Z-Axis
Mill head tilts to ±45º forward and back
Mill head tilts to ±90º left and right
Manual quick action quill lever
Tool box and manual

Specifications of this product

Order Code: M630D
Model: BM-70VE
Digital Readout: 3-Axis Digital Readout
Type: Vertical
Table Size (mm: 1500 x 305
Column Type: ~
Spindle Taper – Vertical: NT40
Spindle Taper – Horizontal: ~
Longitudinal Travel (X-Axis) (mm): 1050
Cross Travel (Y-Axis) (mm): 420
Vertical Travel (Z-Axis) (mm): 500
Type of Slides: Dovetail (X), Square (Y & Z)
Ram Travel (mm): 485
Spindle to Table (mm): 460
Spindle Travel / Diameter (mm): 155 / 105
Throat Depth (max.) (mm): 750
Tilting Head (Left ~ Right): ±90º
Tilting Head (Forward ~ Back): ±45º
Drilling Capacity (mm): ~
End Milling Capacity (mm): ~
Face Milling Capacity (mm): ~
Power Feed - Quill (mm/rev): 0.04 / 0.08 / 0.13
Power Feed - Longitudinal (X-Axis) (mm/min): 30 - 3000
Power Feed - Cross (Y-Axis) (mm/min): 30 - 3000
Power Feed - Vertical (Z-Axis) (mm/min): Rapid
Table T-Slot Size (inch / mm): 5/8
Work Table Load Capacity (kg) 500
Spindle Speeds Vertical (No./ rpm): Inverter (70 - 4200)
Spindle Speeds Horizontal (No./ rpm): ~
Motor Power - Vertical (kW / hp): 3.75 / 5
Motor Power - Horizontal (kW / hp): ~
Voltage / Amperage (V / amp): 415
Shipping Dimensions (L x W x H) (cm): 160 x 170 x 240
Nett Weight (kg): 1800

To contact Maxon Machinery about Maxon machinery Turret Mill | M630D use Get a quote.

Features of this product

3 Axis digital readout fitted,
5HP 415V motor, inverter control variable speed system with automatic spindle brake (BM-70VE)
High quality spindle speed control with digital readout
NT40 Spindle taper with a 105mm chrome & ground quill
Digital spindle speed readout
Hardened & ground work table & slide-ways
Square construction slides for X & Z axis to maximise rigidity
Turcite B coated X & Y-Axis slide-ways reduces friction for smooth operation
Pneumatic operation drawbar system for quick and effortless tool change
Powered elevating motor for Z-Axis
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
Inverter controlled feed motors on X & Y-Axis
Micro switch on the manual knee handle for additional operator safety
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Automatic quill feed 0.04, 0.08, 0.13mm/rev
Automatic cut off depth stop on quill
Automatic oil lubrication pump and reservoir
Slide-way covers Y & Z-Axis
Mill head tilts to ±45º forward and back
Mill head tilts to ±90º left and right
Manual quick action quill lever
Tool box and manual

Specifications of this product

Order Code: M630D
Model: BM-70VE
Digital Readout: 3-Axis Digital Readout
Type: Vertical
Table Size (mm: 1500 x 305
Column Type: ~
Spindle Taper – Vertical: NT40
Spindle Taper – Horizontal: ~
Longitudinal Travel (X-Axis) (mm): 1050
Cross Travel (Y-Axis) (mm): 420
Vertical Travel (Z-Axis) (mm): 500
Type of Slides: Dovetail (X), Square (Y & Z)
Ram Travel (mm): 485
Spindle to Table (mm): 460
Spindle Travel / Diameter (mm): 155 / 105
Throat Depth (max.) (mm): 750
Tilting Head (Left ~ Right): ±90º
Tilting Head (Forward ~ Back): ±45º
Drilling Capacity (mm): ~
End Milling Capacity (mm): ~
Face Milling Capacity (mm): ~
Power Feed - Quill (mm/rev): 0.04 / 0.08 / 0.13
Power Feed - Longitudinal (X-Axis) (mm/min): 30 - 3000
Power Feed - Cross (Y-Axis) (mm/min): 30 - 3000
Power Feed - Vertical (Z-Axis) (mm/min): Rapid
Table T-Slot Size (inch / mm): 5/8
Work Table Load Capacity (kg) 500
Spindle Speeds Vertical (No./ rpm): Inverter (70 - 4200)
Spindle Speeds Horizontal (No./ rpm): ~
Motor Power - Vertical (kW / hp): 3.75 / 5
Motor Power - Horizontal (kW / hp): ~
Voltage / Amperage (V / amp): 415
Shipping Dimensions (L x W x H) (cm): 160 x 170 x 240
Nett Weight (kg): 1800

Read less...

To contact Maxon Machinery about Maxon machinery Turret Mill | M630D use Get a quote.

Maxon Machinery_Turret Mill M630D_Brochure(0.23MB)

AI Overview BETA

The Maxon Machinery M630D is a vertical turret milling machine with a 1,500 mm x 305 mm table for metalwork machining tasks. Its inverter control lets the operator select spindle speeds from 70 to 4,200 rpm for different cutting tasks. The head tilts forward, back and side to side, giving machinists different spindle positions for angled workpieces.

Three-axis digital readout covers X, Y and Z
Pneumatic drawbar enables quick tool changes
X-axis travel: 1,050 mm; Y-axis travel: 420 mm
Z-axis travel: 500 mm
Work table load capacity: 500 kg

Source: listing by Maxon Machinery on IndustrySearch · Updated 2 Nov 2026
Specification sheet: Maxon Machinery_Turret Mill M630D_Brochure (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Maxon Machinery provide you with a quote