Metalmaster Turret Mill | Geared Head ...

Metalmaster - Turret Mill | Geared Head HM-54GV Price Guide: $8,660

Supplier: General Tools Adelaide

Turret Mill | Geared Head HM-54GV

This HM-54GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle.

23 Recent Views In Stock

With a powerful continuous-load 2.2kW / 3hp vertical motor and a 2hp motor for the horizontal spindle, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The hi-low geared head selector lever mounted on right side of milling head allows for quick change off speed range.

Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage LED work light, coolant system, X axis power feed unit, drill chuck, 1? & 1-1/4? horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Key Features:

Electronic inverter variable spindle speeds
3 Axis digital readout system
Swivel table left & right with graduated scale
Mill head tilts to ±45º left to right
450mm horizontally sliding and rotating ram
NT30 Horizontal and vertical spindles that are hardened and ground
Precision-ground dovetail slide-ways and table
Precision milling table incorporating machined T slots
Rear concertina slide-way cover
Forward and reverse button switch
Fine hand wheel operated quill feed
Swarf & splash tray
Spindle lock for quill
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Vertical quill hand-wheel dial graduations @ 0.05mm
All slides utilise dovetail construction for maximum rigidity
Includes 1? & 1-1/4? arbors for the horizontal spindle

To contact General Tools Adelaide about Metalmaster Turret Mill | Geared Head HM-54GV use Get a quote.

Key Features:

Electronic inverter variable spindle speeds
3 Axis digital readout system
Swivel table left & right with graduated scale
Mill head tilts to ±45º left to right
450mm horizontally sliding and rotating ram
NT30 Horizontal and vertical spindles that are hardened and ground
Precision-ground dovetail slide-ways and table
Precision milling table incorporating machined T slots
Rear concertina slide-way cover
Forward and reverse button switch
Fine hand wheel operated quill feed
Swarf & splash tray
Spindle lock for quill
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Vertical quill hand-wheel dial graduations @ 0.05mm
All slides utilise dovetail construction for maximum rigidity
Includes 1? & 1-1/4? arbors for the horizontal spindle

Read less...

To contact General Tools Adelaide about Metalmaster Turret Mill | Geared Head HM-54GV use Get a quote.

AI Overview BETA

The Metalmaster HM-54GV is a geared-head turret mill with vertical and horizontal spindles for machining workpieces in either orientation. Its inverter drive changes vertical spindle speed electronically, so operators can adjust speed to suit the machining task. Trade users setting up angled work can swivel the table left or right, using its graduated scale to guide positioning.