Metalmaster Turret Mill | M599D

Metalmaster - Turret Mill | M599D Price Guide: $16,174

Supplier: General Tools Adelaide

Turret Mill | M599D

This Turret Milling Machine features 3 Axis digital readout fitted, 5HP 415V motor with mechanical variable speed system (50-3350rpm), NT40 Spindle taper with a 105mm chrome & ground quill.

11 Recent Views In Stock

Key Features:

Hardened ballscrew X & Y-Axis providing smooth and accurate operation
1370mm x 254mm table with 16mm T-slots
Travels: 890mm longitudinal, 400mm cross, 400mm vertical
Quill travel:127mm
Ram travel: 550mm
Spindle to table: 450mm
Digital speed readout display for accurate cutter speed
Hardened & ground work table & slide-ways
Square construction slides for Y & Z-Axis to maximise rigidity
Powered elevating motor for Z-Axis
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
X & Y-Axis power-feed with adjustable micro switch feed stops
Micro switch on the manual knee handle for additional operator safety
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Automatic quill feed 0.04, 0.08, 0.15mm/rev
Automatic cut off depth stop on quill
Oil lubrication pump and reservoir
Slide-way covers Y & Z-Axis
Mill head tilts to ±45º forward and back
Mill head tilts to ±90º left and right
Manual quick action quill lever
Mechanical spindle brake
Tool box and manual

Includes:

3 Axis digital readout fitted
Hardened ballscrew X & Y-Axis
Digital speed readout display
One-shot oil lubrication pump and reservoir
X & Y-Axis power-feed
Z-Axis powered elevating motor
Machine vice 160mm
Clamp kit set
Drawbar M16 thread
Coolant system
Slideway covers
Safety cutter guard
Halogen light
Swarf tray

To contact General Tools Adelaide about Metalmaster Turret Mill | M599D use Get a quote.

Key Features:

Hardened ballscrew X & Y-Axis providing smooth and accurate operation
1370mm x 254mm table with 16mm T-slots
Travels: 890mm longitudinal, 400mm cross, 400mm vertical
Quill travel:127mm
Ram travel: 550mm
Spindle to table: 450mm
Digital speed readout display for accurate cutter speed
Hardened & ground work table & slide-ways
Square construction slides for Y & Z-Axis to maximise rigidity
Powered elevating motor for Z-Axis
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
X & Y-Axis power-feed with adjustable micro switch feed stops
Micro switch on the manual knee handle for additional operator safety
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Automatic quill feed 0.04, 0.08, 0.15mm/rev
Automatic cut off depth stop on quill
Oil lubrication pump and reservoir
Slide-way covers Y & Z-Axis
Mill head tilts to ±45º forward and back
Mill head tilts to ±90º left and right
Manual quick action quill lever
Mechanical spindle brake
Tool box and manual

Includes:

3 Axis digital readout fitted
Hardened ballscrew X & Y-Axis
Digital speed readout display
One-shot oil lubrication pump and reservoir
X & Y-Axis power-feed
Z-Axis powered elevating motor
Machine vice 160mm
Clamp kit set
Drawbar M16 thread
Coolant system
Slideway covers
Safety cutter guard
Halogen light
Swarf tray

Read less...

To contact General Tools Adelaide about Metalmaster Turret Mill | M599D use Get a quote.

AI Overview BETA

The Metalmaster M599D is a turret milling machine that uses a rotating cutter to remove material from metal workpieces. Its digital speed readout displays cutter speed to support accurate speed setting during milling operations. Machinists needing to approach a workpiece from different positions can reposition the spindle using the horizontal ram mounted on a rotating base.