OPTIMEL Low Pressure Moulding | High Volume ...

OPTIMEL - Low Pressure Moulding | High Volume Production | Flexline Shuttle

Supplier: Tarapath

Low Pressure Moulding | High Volume Production | Flexline Shuttle

Optimel tooling

Close-up OM2002

1/3

The OptiMel Flexline shuttle table machine has been developed for manufacturing medium- to high-volume production.

Video for OPTIMEL Low Pressure Moulding | High Volume Production | Flexline Shuttle

Increases productivity

433 Recent Views In Stock

The Optimel 2002 has an integral automatic process control. It is a one operator workstation with up to 60% higher output than the OM2000. It is also possible to integrate the OM2002 into fully automatic production lines.

The Optimel 2002 machine combines a high level of process consistency and control in an operator-friendly workstation. Production cycle time has been significantly decreased with the addition of the sliding table. Many optional extras can be added to further increase efficiency.

The sliding table single station accepts two mould lower parts and one upper mould with pneumatic tool clamping system / touch panel / automatic process control with moulding pressure profile control and tool ejectors control.

Sliding table single station accepts two mould lower parts and one upper mould with pneumatic tool clamping system
Touch Panel
Automatic process control
Moulding pressure profile control
Tool ejectors control

Available options

Tool temperature control
Pressure monitoring
Automatic tank filling

Key Specs

Air Pressure: 0,6 MPa / 6,0 bar
Injection Pressure: 0 - 0,4 MPa / 0 - 4 bar
Tool Clamping Force: 470 N / 480 kg
Power Supply: 3 /N / PE AC 400 V /50 Hz
Power Consumption:500 W
Weight: 350 kg
Workstation Dimensions: W 1325 mm X H 1650 mm X D 820 mm

For more information or a quote please call or email for a direct reply.

To contact Tarapath about OPTIMEL Low Pressure Moulding | High Volume Production | Flexline Shuttle use Get a quote.

Sliding table single station accepts two mould lower parts and one upper mould with pneumatic tool clamping system
Touch Panel
Automatic process control
Moulding pressure profile control
Tool ejectors control

Available options

Tool temperature control
Pressure monitoring
Automatic tank filling

Key Specs

Air Pressure: 0,6 MPa / 6,0 bar
Injection Pressure: 0 - 0,4 MPa / 0 - 4 bar
Tool Clamping Force: 470 N / 480 kg
Power Supply: 3 /N / PE AC 400 V /50 Hz
Power Consumption:500 W
Weight: 350 kg
Workstation Dimensions: W 1325 mm X H 1650 mm X D 820 mm

For more information or a quote please call or email for a direct reply.

Read less...

To contact Tarapath about OPTIMEL Low Pressure Moulding | High Volume Production | Flexline Shuttle use Get a quote.

Let Tarapath provide you with a quote

Supplier

Supplier: Tarapath

Distribution: Australia, NZ and Asia-Pacific, Worldwide

Location: Kensington, VIC

Customers: Electronics Manufacturing and Cable Assembly

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Tarapath are also proudly displaying these credentials:

Established:

1989

Employees:

6-20

Customers:

Electronics Manufacturing and Cable Assembly

Memberships:

SMCBA

Certifications:

ISO:9001 2015

Distribution:

Australia, NZ and Asia-Pacific, Worldwide